When replacing the battery pack, please follow the same procedure. V__J WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Clean the battery charging contacts in handset and base unit regularly with a dry cloth so that sufficient contact is made. (PRECAUTIONS ) • Before initial use, charge the battery pack in the battery compartment of the handset for approximately 12 to 16 hours wit

TV, radio, appliances. -9- WALL-MOUNTING THE BASE You can mount your cordless telephone's base unit on a wall using two provided screws. © Cut out the template (see page 11) and use it as a guide for placement on the mount screws. (315/i6 inch apart). (D Thread the screws into the wall, letting the heads extend about 1/s inch. Route the phone cord and AC adaptor cord through the guides on the back of the base unit. 3^-(100mm): WALL AC Adaptor Cord i c -— Telephone Cable — -É- (5mm)

Clean the contacts occasionally with a dry cloth. The supplied rechargeable battery pack should last for several years. It, however, eventually it will deteriorated and lasts only for short time even if it is charged. If this happens, you need to replace it with a new one. You can order a rechargeable battery pack at your local Toshiba dealer or authorized parts distributor. Call 1-800-631-3811. (4) THE BASICS 4-1. TONE-PULSE SELECTION Set the TONE/PULSE switch located rear of the base unit

Simply lift the handset from the base unit to answer the call; there is no need to press the TALK button. Note- If the handset is already out of the base unit when the phone begins to ring, you will still have to press the TALK button to answer your call. 4-4. USING THE CHANNEL SELECTOR BUTTON Your FT-2000/2500 selects the channel by pressing the CHANNEL button when interference noise is heard. The TALK/BATT. LOW LED keeps lighting while Talk mode. Note-;-s When the channel selection is ac

TV, radio, appliances.__y 3-2. CONNECTING THE AC POWER Connect the plug at the end of the AC adaptor to a standard 120V AC outlet and the other end to the rear of the base unit. Make sure to route the AC adaptor cord where it will not create a trip hazard, or where it could become chafed and create fire or other electrical hazards. -Note- Do not attach the AC power supply cord to building surfaces using metal fittings. Use only with Toshiba TAC-5000 or TAC-5000BK. 3-3. INSTALLING THE BATTER

The phone number is now stored. To dial a number from memory: • press (TALK). • Press (MEM)and the number key you assigned. USING REDIAL • Press (TALK), then (REDIAL) to automatically redial the last number you dialed. CHANNEL CHANGING If you experience noise or interference during a conversation, press (CHANNEL) to switch to a clear channel. 15 6 USING YOUR PHONE Making Calls Pick up the handset and press (TALK) When you hear a dial tone, dial the number. The indicators for IN USE (o

RC004288 TAC-5000 (Part #. RC004287)for FT-5005 or TAC-5000 BK (Part #. RC004304) for FT-5005 BK Part #. RC001861 Part #. RC004289 Part #. RC004284 Part #. RC000936 WMA-3000 (Part #. RC003561) for FT-5005 or WMA-3000BK (Part #. RC003562) for FT-5005 BK TROUBLESHOOTING GUIDE Should any problem occur with the set, make the following simple tests to determine whether or not servicing is required. If the problem persists after you have made these tests, call 1-800-631-3811 for Customer Serv

(Do not press the TALK button.) © Press the MEM button. (D Dial the desired telephone number. © Press the MEM button. © Select and press the numbers 01 to 20 for whichever number memory you wish to use. If you have more telephone numbers to store in memory, repeat the steps from © to ©. © Return the handset to the base unit. ® Record the telephone numbers on the SPEED DIAL INDEX CARD which is located at the back of the handset. EXAMPLE: (MEM)-»© ® © © © © © -»(mem)-»® © /— Notes-—-- •

Check with State and local codes for possible special disposal instructions. 3. Do not open or mutilate the battery pack. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. 4. Exercise care in handling battery in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns. 5. Charge the battery pack provided with or identified for use with this product