To Turn key tones on/off 26 .. To Set flash (Recall) time 26 .. To Set Dialling Mode (Tone/Pulse) 27 .. To Set Base to default settings 27 .. To Change the PIN code 28 Troubleshooting 29 Cleaning and Care 31 Declaration of Conformity 31 Guarantee and Service 32 Technical Details 33 Connection and conditions for use. You can connect your Concept Combo 2300 to a direct exchange line (DEL) - a line connected to a local exchange, with its own phone number; to an extension on an approved compatible P

Press the LNR/P button [6] and the last dialed number will be automatically redialed. (You can redial a number consisting of no more than 32 digits.) Microphone mute You can turn off the handset microphone during a call. The calling party will not hear you. 1. Press the SEC button [4]. (When the microphone is turned off, the indicator light [2] flashes and the handset buttons are locked.) 2. To cancel the microphone mute, press the SEC button [4] once again. Inserting a pause in the dialed

12 4.3 Answer a Call................................................................................................................................................12 4.4 End a Call.......................................................................................................................................................12 4.5 Adjust Earpiece and Handsfree Volume.....................................................................................................12 4.6 Mute a Call..

your own OGM, it will be used when the answering machine answers the call. If your 4. Press

7.3.6 RENAME THE HANDSET......................................................................................... 7.3.7 CHOOSE THE INFORMATION TO BE DISPLAYED IN IDLE .................................. 7.3.8 SET THE AUTO ANSWER ...................................................................................... . 7.4 BASE SETTINGS ....................................................................................................... 22 5.1 ADD A NEW PHONEBOOK ENTRY ............................

1 INSTALLING YOUR PHONE 1.1 1.2 1.3 If you have a Broadband Line If you connect your telephone to a line with a broadband connection, you will need to insert a micro-filter between the telephone and the telephone line, otherwise you may get interference between the telephone and the broadband, which could cause problems. In a home with broadband, every telephone must have a micro-filter connected, not just the one at the telephone point that your modem is connected to. If you need more broadband

Press and hold to put base into registration i CHARGING CRADLE Display Icons and Symbols The LCD display gives you information on the current status of the telephone. Y-С fjjlOK ► £ Indicates you can scroll up / down the menu items / Phonebook list / Redial list/Call List ’Y' Steady when the handset is in range of the base. Flashes when out of range of the base or not registered to the base. ^ Steady when an intercom call is in progress. Flashes when there is an incoming internal call. f

15 4.1.3 CALL FROM THE PHONEBOOK .............................................................................. 15 4.1.4 CALL FROM THE CALL LIST .................................................................................. 15 4.1.5 CALL FROM THE REDIAL LIST................................................................................ 15 4.1.6 CALL TIMER ........................................................................................................ 15 4.2 ANSWER A CALL ...........

C). 2. Insert a 9V battery (6F22 type) into the battery compartment [35] on the base unit [28] then close the compartment [35] with the cover [36] and fasten the cover [36] with the screw [37] (see Fig. D). 3. Connect one end of the phone line cord [42] to the phone line jack [40] at the base unit [28] rear side, and the other end of the phone line cord [42] to the phone line socket. 4. Insert the AC adapter [41] cable plug into its jack [39] at the base unit [28] rear side. Insert the AC ad

2 Press Ў TWICE • base Altogether, you can have up to five handsets registered to the base unit, as speak to the user. If the other handset does not answer, you can get back to To check whether a handset is registered, make sure mains power to the base 3 Press OK • volume numbers 2, 3, 4 and 5. the outside call by pressing INTERCOM again. unit is switched on and the handset is within range. The handset’s display 4 Press Ў SEVEN times • del hs With more than one handset registered to your base un