Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
shutting off air valves. 3. KEEP WORK AREA CLEAN. 7. DO NOT FORCE TOOL. It will do Cluttered areas and benches invite the job better and safer at the rate accidents. for which it was designed. 4. DO NOT USE IN DANGEROUS 8. USE THE RIGHT TOOL. Do not ENVIRONMENT. Do not use pneu-force tool or attachment to do a job matic tools in damp or wet loca-for which it was not designed. tions, or where any flammable or 9. DO NOT USE UNDER THE noxious fumes may exist. Keep INFLUENCE OF DRUGS OR work area well lighted. ALCOHOL. -4- Model H7666/H7667 LVLP Spray Gun Safety Instructions For Pneumatic Tools 10. USE PROPER AIR HOSE for the 17. DISCONNECT TOOLS before sertool. Make sure your air hose is in vicing and changing accessories. good condition and is long enough to 18. DO NOT OVERREACH. Keep reach your work without stretching. proper footing/balance at all times. 11. WEAR PROPER APPAREL. Do not 19. USE THE RECOMMENDED wear loose clothing, gloves, neck-ACCESSORIES. Consult owner’s ties, rings, bracelets, or other jew-manual for recommended acceselry which may get caught in moving sories. The use of improper accesparts. Non-slip footwear is recom-sories may cause risk of injury. mended. Wear a protective hair cov20. CHECK FOR DAMAGED PARTS ering to contain long hair. BEFORE USING. Check for bind 12. ALWAYS USE SAFETY GLASSES. ing and alignment of parts, broken Also use a face or dust mask if cut-parts, part mounting, loose bolts, ting operation is dusty. Everyday and any other conditions that may eyeglasses only have impact resis-affect machine operation. Repair or tant lenses, they are NOT safety replace damaged parts. glasses. 21. NEVER LEAVE UNATTENDED 13. WEAR APPROVED HEARING TOOL CONNECTED TO AIR. PROTECTION. Air escaping from Disconnect the air hose and do not pneumatic tools can exceed safe leave tool until it is relieved of any exposure limits and may cause built up pressure. hearing damage with prolonged 22. NEVER ALLOW UNTRAINED exposure. USERS TO USE THIS TOOL 14. SECURE WORK. Use clamps or a WHILE UNSUPERVISED. vise to hold work when practical. It is 23. IF YOU ARE UNSURE OF THE safer than using your hand and frees INTENDED OPERATION, STOP both hands to operate tool. USING TOOL. Seek formal training 15. MAINTAIN TOOLS WITH CARE. or research books or magazines Keep tools lubricated and clean that specialize in pneumatic tools. for best and safest performance. 24. BE AWARE OF HOSE LOCATION Follow instructions for lubricating WHEN USING PNEUMATIC and changing accessories. TOOLS. Hoses can easily become 16. REDUCE THE RISK OF a tripping hazard when laid across UNINTENTIONAL STARTING. Do the floor or spread out in a disorganot carry tool with hand on trig-nized fashion. ger and always disconnect from air when not in use. Model H7666/H7667 LVLP Spray Gun -5 Additional Safety Instructions for LVLP Spray Guns 1. READ THIS MANUAL. This manual contains proper operating instructions for this spray gun. 2. READ MATERIAL LABELS and MATERIAL SAFETY DATA SHEETS (MSDS). Read and know all the instructions on the packaging label and the MSDS before opening the package. This information could save your life. 3. RESPIRATORY PROTECTION. Always wear a NIOSH approved respirator when spraying or working around finishing materials. 4. FIRE EXTINGUISHERS. Always have a fully charged multi class or class B fire extinguisher in the immediate area. 5. FLAMMABLE MATERIAL. NEVER spray near open flame or where any spark could occur. 6. FRESH AIR. Always provide adequate exhaust to keep area free of built up vapors, NEVER spray in an enclosed space. 7. DISCONNECT COMPRESSED AIR. Always disconnect the spray gun from compressed air before cleaning, changing attachments or when performing maintenance of any kind on this tool. 8. PROTECTIVE CLOTHING. Protect exposed skin from overspray by wearing a protective suit or other approved garment. 9. INAPPROPRIATE USE. DO NOT point or shoot spray gun directly at yourself or another person or animals. Do not attempt to use the spray gun for any other use than it was intended. 10. STORAGE. Thoroughly clean and dry spray gun before storage. Store in an approved cabinet. 11. SOLVENTS. Always store solvents and shop towels soaked in solvent in approved containers. 12. EYE PROTECTION. Wear eye protection whenever spraying or cleaning. Solvents and chemicals can cause serious eye injury, which could lead to blindness. 13. OPERATING PRESSURE. DO NOT exceed the recommended inlet air pressure. Excessive pressure could cause the spray gun to burst or cause other internal equipment damage. 14. LOCAL LAWS. Consult local authorities regarding exhaust and waste disposal requirements. -6- Model H7666/H7667 LVLP Spray Gun Model H7666/H7667 LVLP Spray Gun -7- We are proud to offer the Grizzly Model H7666/H7667 LVLP Spray Gun. This spray gun is part of a growing Grizzly family of fine tools. When used according to the guidelines set forth in this manual, you can expect years of trouble-free, enjoyable operation, and ...
Otros modelos de este manual:Armas - H7666 (1.32 mb)