Votos - 4, Puntuación media: 3.3
(
)
)
|
Resumen del manual
Introduction With this unit, you can: know the time/date• set an alarm timer to wake you up• What’s in the box Check and identify the contents of your package: Main unit• User manual• Overview of the main unit bcdefga a Function selector Switch to normal mode.• Set alarm/clock/calendar.• b HR·MONTH Set the hour/month.• c MIN·DATE Set the minute/date. • d 12/24·YEAR Select 12/24 hour format.• Set the year.• e ON·OFF Turn on/off the alarm timer.• f Display panel Show the time/date/alarm information.• g REPEAT ALARM/BACKLIGHT Repeat the alarm.• Turn on the backlight.• 3 Get started Caution Use of controls or adjustments or performance of procedures other •• than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Install battery Caution Risk of explosion! Keep batteries away from heat, sunshine or fire. •• Never discard batteries in fire. Risk of product damage! When the apparatus is not used for long •• periods, remove the battery. 1 Open the battery compartment. 2 Insert 1 AA battery (not supplied) with correct polarity (+/-) as indicated. 3 Close the battery compartment. Note Batteries contain chemical substances, so they should be disposed •• of properly. Set time 1 Adjust the function selector to . Time digits begin to blink.»» 2 Press HR·MONTH to set the hour. 3 Press MIN·DATE to set the minute. 4 Adjust the function selector to . To select 12 hour or 24 hour format, press • 12/24·YEAR. Set calendar 1 Adjust the function selector to CALENDAR. 2 Press 12/24·YEAR to set the year. 3 Press HR·MONTH to set the month. 4 Press MIN·DATE to set the date. 5 Adjust the function selector to . Turn on the backlight 1 In dark environment, press REPEAT ALARM/BACKLIGHT to turn on the backlight. 4 Set the alarm timer 1 Before you start, ensure that the time is set correctly. 2 Adjust the function selector to . The alarm time digits begin to blink.»» 3 Press HR·MONTH to set the hour. 4 Press MIN·DATE to set the minute. 5 Adjust the function selector to . Turn on/off the alarm timer Note Ensure that you already set the alarm successfully.•• 1 Adjust ON·OFF to ON or OFF to turn on or off the alarm timer. If the alarm timer is turned on, »» appears. If the alarm timer is turned off, »» disappears. Repeat alarm 1 When the alarm sounds, press REPEAT ALARM/BACKLIGHT. The alarm repeats at 5-minute intervals.»» Note You can repeat the alarm for up to 3 times.•• 5 Product information Note Product information is subject to change without prior notice.•• Specifications General information Power 1xAA battery Operation Power Consumption 30 uW Dimensions - Main Unit (W x H x D) 82 x 66 x 75 mm Weight - With Packing - Main Unit 127 g 87 g 6 Troubleshooting Warning Never re...
Otros modelos de este manual:Registradores de tiempo - AJ110/12 (338.05 kb)