Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
••UTC offsets and the use of summer time are subject to change in the country where they are used. ** In December 2007, the UTC offset for Caracas, Venezuela (CCS) was changed from –4 to –4.5. However, this Clock still uses the old UTC offset of –4 when the Caracas (CCS) city code is selected. ENGLISH ••Depending on the clock model, its configuration may differ somewhat from that shown in the illustration. OPERATING PRECAUTIONS •• Do not use or store this clock in areas exposed to temperature extremes, strong magnetism, strong vibration, or strong impact. •• Heat can shorten battery life and cause malfunction. Keep the clock away from heaters and direct sunlight when using it. ••Never use the clock in a bathroom or any other area subject to high humidity. ••Never try to take the clock apart. Doing so can cause malfunction. •• To clean the clock, use a soft, dry cloth or a cloth moistened in a solution of water and a mild neutral detergent. Wring out all excess moisture from the cloth. Never use thinner, benzene, alcohol or other similar agents. ••Be sure to keep all user documentation handy for future reference. CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or any claims by third parties that may arise through the use of this clock. General Guide 1 Hour hand 2 Time of day indicator Sun: Daytime Moon: Nighttime 3 Minute hand 4 Second hand 5 Alarm hand 6 Bezel For selecting the city whose time you want to view. 7 Battery cover 8 Time adjustment dial 9 Alarm ON/OFF switch : Alarm time adjustment dial A Battery USING THE CLOCK 1. Open the Battery cover (7) as shown in the illustration. 2. Ensuring that its ends are facing correctly, load a Battery (A) into the clock. 3. Remove the Battery (A) from the clock when the Second hand (4) reaches 12 o’clock. 4. Rotate the Bezel (6) counterclockwise until the city code you want to select is located at 12 o’clock (or SUMMER in the case of summer time). •• If you rotate the Bezel (6) clockwise and the Hour hand (1) passes over the Alarm hand (5), the alarm hand will start to move along with the hour hand. 5. Use the Time adjustment dial (8) to adjust the current time setting. •• Check to make sure that the proper Time of day indicator (2) is shown for the time you are setting. The sun indicates daytime, while the moon indicates nighttime. 6. At the top of a minute, load the Battery (A) to start timekeeping. USING THE ALARM Setting the Alarm Time Rotate the Alarm time adjustment dial (:) to move the Alarm hand (5) to the time you want the alarm to sound. ••The alarm does not distinguish between a.m. and p.m. ••The alarm will continue to sound for about 60 minutes if you do not stop it. Turning the Alarm On or Off Use the Alarm ON/OFF switch (9) to turn the alarm on or off. Alarm On Alarm Off Alarm sounds. Alarm does not sound. Stopping the Alarm While the alarm is sounding, press the Alarm ON/OFF switch (9) to stop it. USING THE WORLD TIME With World Time, you can select a city by rotating th...
Otros modelos de este manual:Relojes - TQ-131U (570.75 kb)