FAQ-2. How do I find my Auto-Sync Time Clock if my browser does not support the Bonjour plug-in, or I do not want to use the auto discovery Zero Configuration Protocol? . Install and open the Auto-Sync Utility provided on the CD that came with your clock. . Consult the Quick-Start Guide that came with your clock. . Visit for additional support. FAQ-3. Can I print individual Auto-Sync Time Clock time sync transaction reports from my PC? Yes. This does not require any additional software as transa

If multiple clocks are selected, all the selected clocks downloaded will be the one copied to this folder. If a report is created from these files using the utility, any transaction file in the folder will be included in the report (see Figure 5-21). See the status window in Figure 5-21 for an example of configuration file download. Clear Transactions: clear all sync transactions stored in the clock. Reset Config: Reset the clock configuration to factory default settings. This command could be u

724-746-5500 | blackbox.com 4-29 Auto-Sync Time Clock “USER TIME SYNC” – Used to designate that a manual time sync has been performed using the Reset function from Diagnostics (see How to Reset the Clock in Chapter 6). Figure 4-28. View Transactions Example. NOTE: The display will only show 25 transactions. Click the buttons to move backward or forward 25 transactions in the display. When the transaction file is saved as a file, the filename will end in “_rpt” (see Figure 4-24 for an example of

This can be any message you want sent for that event. button to save the e-mail Report & Backup events settings. 17.Click the 4-18 724-746-5500 | blackbox.com Chapter 4: Operation 4.1.8.2. SNMP Trap Setup Simple Network Management Protocol (SNMP) is used in network management systems to monitor network-attached devices for conditions that warrant administrative attention either on-site or remotely. A network administrator can use SNMP to monitor the availability-performance-error rates either on

If OATS compliance is necessary, the Time Zone must be set to the default of (GMT-05:00) Eastern Time (US & Canada). 3. Click on 12 hour (AM/PM) or 24 hour (Military) (default = military) to set the display format. This format will also be used on transaction reports. 4. Select to show either the day of the month or seconds on the clock display (default = seconds). 724-746-5500 | blackbox.com 4-5 Auto-Sync Time Clock 5. Check whether or not daylight savings should be applied. This option should

. AC power (Auto-Sync Time Clock comes with 6 foot long cable attached to power adapter if not equipped with the PoE option). . A web browser for configuring the Auto-Sync Time Clock. . It is recommended to install the Utility CD that was included to discover the clock and connect to the web login. . Bonjour (formerly Rendezvous) plug-in installed in Internet Explorer browser for discovering the clock. If not installed you can go to to download and install, or Safari browser for Windows. 3.1. Co

Trademarks Used in this Manual Ethernet is a registered trademark of Xerox Corporation, Inc. XP, VISTA, IE, Microsoft, Windows, Windows NT, are registered trademarks of Microsoft Corporation in the United States and/or other countries. Bonjour is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Safari is a registered trademark of Apple Computer, Inc., registered in the U.S. and other countries. Digi Connect ME is a registered trademark of Digi International, Inc.

724-746-5500 | blackbox.com 2-1 Auto-Sync Time Clock Figure 2-2. Auto-Sync Time Clock Cover Removal. 2.4. Unpacking the Clock After removing the upper cover, lift up the Printer Block (A) and remove the Packaging Spacer (B). Figure 2-3. Auto-Sync Time Clock Packaging. NOTE: The serial number can be found on the bottom of your clock. 2.5. Installing the (ASTCBK) Optional Full Power Reserve (FPR) 1. Disconnect the clock AC adapter from the power outlet. NOTE: Failure to do so could result in a haz