Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
If a receiver does not have some of the features shown, simply leave those jacks or terminals vacant on the 947. Always connect the A/V cables to the VCR 1 or Video 1 jacks on the receiver. To prevent a blank screen when switching from a GUI reciver to a non-GUI receiver, you should install a 986 Video AutoPatcher in your system. There is no optical digital connection on the 947 - use the coax input on digital audio receivers, or use Model 977T Coax to Optical Adapter. Instructions for other types of surround sound configurations are available if needed. Contact your Audio Authority® at the phone number below. System Bus Connections 947 Receiver Selector Group Address" Setting Module Address — Settings Indicator/PSB, Connections Stereo Audio Low Level Bus Connections (input from source) Digital Audio (Coax) Bus Connections (input from source) Digital Audio (AC-3/RF) Bus Connections (input from source) Video Bus Connections (input from source) Video Bus Connections (output to monitor) Sub Out Bus Connections (output to Subs) Front Speaker Output Bus Connections (IN & OUT) Center Speaker Output Bus Connections (IN & OUT) Surround Speaker Output Bus Connections (IN & OUT) & \ \ flHHH -in !□ o Audio^pKuthority' Wire Color Code Green L+ Brown R+ White L- Gray R- Audio^^Authority* Tech Support USA and Canada: 800-322-8346 (Mon-Fri 8:30 AM to 5:00 PM Eastern Time) Phone: 859-233-4599 Fax: 859-233-4510 Hookup drawings and FAQ http://www.audioauthority.com...