Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
EX Dolby Digital EX O O O O O DIGITAL L, C, R, SL, SR, SBL, SBR, SW Dolby D (5.1ch) Dolby Digital EX O O O O O DIGITAL L, C, R, SL, SR, SBL, SBR, SW DTS-ES DTS-ES O O O O O dts, ES L, C, R, SL, SR, SBL, SBR, SW DTS (5.1ch) DTS-ES O O O O O dts L, C, R, SL, SR, SBL, SBR, SW STEREO Dolby D (2ch) Stereo O – – – O DIGITAL L, R, SW Dolby D (2ch Surr) Stereo O – – – O DIGITAL L, R, SW L.PCM (Audio) Stereo O – – – O L.PCM L, R, SW L.PCM 96KHz Stereo O – – – O L.PCM L, R, SW Analogue Stereo O – – – O Analogue L, R, SW True-HD True-HD True-HD O O O O O True-HD L, C, R, SL, SR, SBL, SBR, SW Dolby Digital + Dolby Digital + Dolby Digital + O O O O O Dolby Digital + L, C, R, SL, SR, SBL, SBR, SW DTS-HD Master Audio Master Audio O O O O O DTS-HD L, C, R, SL, SR, SBL, SBR, SW High Resolution High Resolution O O O O O DTS-HD L, C, R, SL, SR, SBL, SBR, SW • L/R : front speaker (left/right) C : centre speaker SL/SR : surround speaker (left/right) SBL/SBR : surround back speaker (left/right) SW : subwoofer M . Channel status displays are dependent on the speaker configuration. . SFE mode works with 2-ch signals. . If Dolby Pro Logic IIz is set to On, the Surround Back speaker(SBL/SBR) is changed to the Front Height Speaker(FHL/FHR), Dolby true HD, Dolby plus, DTS-HD Master Audio ,SFE and NE0:6 will be output 5.1 channel. USING THE SUBWOOFER SELECTION BUTTON You can set the subwoofer to on/off. Press the SUBWOOFER button. 46 HW-C700-C770S-C770BS-ELS_0616.in46 46 2010-06-16 4:28:19 ENG LISTENING TO THE RADIO You can listen to the radio by using either automatic or manual tuning. 1. Press the INPUT SELECT button to select FM. 2. Select a frequency (radio broadcast). • Preset tuning : Press the #,$buttons on the remote control to select the preset frequency. • Manual tuning 1 (Automatic tuning): Press and hold the TUNING/CH ( .,,) buttons on the remote control to automatically tune in a frequency. • Manual tuning 2 : Press the TUNING/CH ( .,,) buttons on the remote control to increase or decrease the frequency step by step. M . You can also use the SELECT (.,,) button on the main uint to change the radio frequency. To Listen in mono/stereo Press the MO/ST button on the remote control. • Each time you press this button, STEREO or MONO will be selected in turn. • If you select MONO in an area with weak reception, it will help to reduce noise. • This function works only with the remote control. Presetting radio stations You can preset up to 30 FM stations. E.g.: Setting station FM 89.10 in preset 2. 1. Press the INPUT SELECT button to select FM. 2. Press the TUNING/CH ( .,,) buttons on the remote control to select 89.10. • Refer to step 2 above to tune in automatically and manually. • 3. Press the MEMORY button on the main unit. • You can also use the TUNER MEMORY button on the remote control. • Tuner number will blink on the display. • 4. Press the TUNING/CH ( .,,) buttons on the remote control to select preset 2. • You can select from presets 1 to 30. • 5. Press the MEMORY button on the main unit. • Tuner number will disappear and station 89.10 will be saved in preset 2. 6. To preset other stations, repeat steps 2 to 5. To Listen to Preset Station • Press the TUNING MODE button to select PRESET and press the SELECT ( .,,) buttons. 47 . OPERATION HW-C700-C770S-C770BS-ELS_0616.in47 47 2010-06-16 4:28:19 Operation ABOUT RDS BROADCASTING Using the RDS (Radio Data System) to receive FM stations RDS allows FM stations to send an additional signal along with their regular program signals. For example, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc. When tuned to an FM station which provides the RDS service, the RDS indicator lights up on the display. Description on RDS function AMP/TV BD/DVD1 3 4 5 6 RDS DISPLAY TA PTY-PTY SEARCH PTY+ AMP/TV DIMMER SLEEPNEO : 6 BD/DVD PROLOGIC AUDIO ASSIGN DSP 2 7 8 9 0 • PTY (Program Type) : Displays the type of programme currently being broadcast • PS NAME (Program Service Name) : Indicates the name of broadcasting station and is composed of 8 characters. • RT (Radio Text) : Decodes the text broadcast by a station (if any) and is composed of maximum 64 characters. • CT (Clock Time) : Decodes the real time clock from the FM frequency.Some stations may not transmit PTY, RT or CT information therefore this may not be displayed in all cases. • TA (Traffic Announcement) : When "TA ON" displays, it shows that the traffic announcement is in progress. M . RDS may not operate correctly if the station tuned is not transmitting RDS signal properly or if the signal strength is weak. To show the RDS signals You can see the RDS signals the station sends on the display. Press the RDS DISPLAY button while listening to an FM station. . Each time you press the button, the display change to show you the following information : PS NAME RADIO TEXT CLOCK/TIME FREQUENCY AMP/TV BD/DVD 1 RDS DISPLAY - AMP/TV DIMMER SLEEPNEO : 6 BD/DVD 2...
Otros modelos de este manual:El receptor y el amplificador - HW-C700 (9.9 mb)
El receptor y el amplificador - HW-C700B (9.9 mb)