Votos - 3, Puntuación media: 4 ( )

Fabricar: Kenwood Tamaño del archivo: 1.35 mb Nombre del archivo: Idioma del manual:

Otros manuales para este modelo:

El receptor y el amplificador - KRF-V5450D (1.73 mb)

El receptor y el amplificador - KRF-V5450D (1.72 mb)

El receptor y el amplificador - KRF-V5450D (1.83 mb)

English 21 Speaker setup (Easy Setup) Speaker setup (Easy Setup) Setup The speaker settings can be completed by simply selecting the room type and listening position. The audio will be corrected automatically according to the characteristics of the speaker system in use. If more detailed speaker settings are required, use the procedure in .. EASY SETUP MULTI CONTROL 1 Press [EASY SETUP] to enter the Easy Setup mode. 2 Set the listening room size. Use [MULTI CONTROL] to select your room type. [EASY SETUP] 3 Select the listening position. Use [MULTI CONTROL] to select your listening position. [EASY SETUP] The unit exits the Easy Setup mode, and the speakers are set up as shown below. Subwoofer \ ON Front speaker \ Avarage size Center speaker \ Avarage size Surround speaker \ Avarage size Surround Back speaker \ OFF Subwoofer Re-mix \ ON For details on the setting contents, see .. • Easy setup with may not be appropriate with certain speaker systems or listening environment. In this case, go through . • Easy setup can set only the 5.1 channel system. For KRF-V6400D : If the setup for 6.1-channel system is required, go through . • Surround Back speaker : KRF-V6400D only • Subwoofer Re-mix: Mixes the bass tone of other channels to the subwoofer channel. Reference for listening room size 5m (16'5-3/8") 6m (19'8-7/8")7m (23'3/4m (13'1-7/8") 3m (9'10-3/8") 4m (13'1-7/8") 12m2 24m2 35m2 SMALL MEDIUM LARGE Reference for listening position FRONT CENTER REAR 22 KRF-V6400D/KRF-V5450D Speaker setup (Detailed Setup) Speaker setup (Detailed Setup) The detailed settings allow you to enjoy full performance of the receiver according to the environment of your listening room. For creating the best listening environment, Kenwood recommends to perform the setup at the listening position. SETUP MULTI CONTROL ../ Speaker setup flow Speaker settings consist of 6 elements. 1 Enter the Detailed Setup mode. [SETUP] Use [MULTI CONTROL ./5] to select an item to set. [SETUP] Elements Display Setting Selects whether each speaker channel is Speaker Configuration "SP SETUP" used or, if used, its size. Speaker Level "TESTTONE" Selects the output level from each speaker. Speaker Distance "DISTANCE" Selects the distance between each speaker and the listening position. Sets the lower limit of the bass frequencies reproduced from the speakers Crossover "CROSSOVER" set to "NML" in the "SP SETUP". The frequencies below the frequency set here are distributed to other speakers (those set to "LRG" and the subwoofer). Selects the level of bass audio Low Frequency Effects Level "LFE LVL" enhancement. Low Frequency Effect channel delivers separate non-directional bass signals to the subwoofer for more dynamic deep bass sound effects. Lip Sync (KRF-V6400D only) "LIP SYNC" Adjusts the deviation in time between the video and audio. "EXIT" Exits the Detailed Setup mode. 2 Set each item. See the followings for each setup item. Speaker configuration Select the use of each speaker and its size. 1 Enter the Detailed Setup mode. [SETUP] Use [MULTI CONTROL ./5] to select "SP SETUP". [SETUP] 2 Select the use and size of each speaker. Use [MULTI CONTROL ./5] to select the speaker and its use or size. [SETUP] Repeat the above operations until all of the speakers have been set up. Speaker Display Setting Subwoofer "SUBW ON" "SUBW OFF" Subwoofer is connected. Subwoofer is not connected. Setup "FRNT LRG" Large size front speaker Front speaker "FRNT NML" Average size front speaker "CNTR LRG" Large size center speaker Center speaker "CNTR NML" Average size center speaker "CNTR OFF" Center speaker is not connected. "SURR LRG" Large size surround speaker Surround speaker "SURR NML" Average size surround speaker "SURR OFF" Surround speakers are not connected. "BS LRG" Large size surround back speaker is connected. (6.1ch) Surround Back speaker (KRF-V6400D only) "BS NML" Average size surround back speaker is connected. (6.1ch) "BS OFF" Surround back speaker is not connected. Subwoofer Re-mix*1 "RMX ON" Subwoofer re-mix is on. "RMX OFF" Subwoofer re-mix is off. *1 Mixes the bass tone of other channels to the subwoofer channel. 3 Go to the next setting. Continued English 23 Speaker setup (Detailed Setup) Speaker setup (Detailed Setup) Setup • Reference for speaker size "LRG"(Large) : A speaker with a sufficient bass reproduction capability (a speaker with a large woofer or a large cabinet size). "NML"(Normal) : A speaker with a lower bass reproduction capability than the "LRG" speakers (the bass frequencies will be output from the speakers set to "LRG" and the subwoofer). If you cannot identify the size of a speaker, it is recommended to set it to "NML". • When "SUBW OFF" is selected, the front speakers are automatically set to "FRNT LRG". • For "FRNT LRG" selection, no sound will be heard from subwoofer even it is set to ON. If you set the Subwoofe...

Descargar ahora

Introduzca dos números de la imagen: