Votos - 2, Puntuación media: 5 ( )

Fabricar: Kenwood Tamaño del archivo: 1.35 mb Nombre del archivo: Idioma del manual:

Otros manuales para este modelo:

El receptor y el amplificador - KRF-V6400D (1.73 mb)

El receptor y el amplificador - KRF-V6400D (1.72 mb)

El receptor y el amplificador - KRF-V6400D (1.83 mb)

Use [MULTI CONTROL ./5] to set the distance. [SETUP] The distance can be set in the range of 0.3 to 9.0 meters (1 to 30.0 ft) in 0.3-meter (1-feet) increments. 24 KRF-V6400D/KRF-V5450D 3 Repeat step 2 for each speaker until the distances of all speakers are set. 4 Go to the next setting. Crossover The crossover frequency is the lower limit of the bass frequencies reproduced from the speakers set to "NML" in the . The frequencies below the set crossover frequency are output from other speakers (those set to "LRG" and the subwoofer). 1 Select "CROSSOVER". [SETUP] [MULTI CONTROL ./5] [SETUP] 2 Set the crossover frequency. Use [MULTI CONTROL ./5] to select crossover frequency. [SETUP] The frequency is selected from 40, 60, 80, 100, 120, 150 and 200Hz. 3 Go to the next setting. LFE (Low Frequency Effect) Level Low frequency effect signal is used exclusively for giving the field effect of bass tone in the Dolby Digital and DTS signal. 1 Select "LFE LVL". [SETUP] [MULTI CONTROL ./5] [SETUP] 2 Set the LFE level. Use [MULTI CONTROL ./5] to select the LFE level. [SETUP] The level is adjusted from 0dB to -10dB in1dB step decrements. 3 Go to the next setting. Lip Sync (KRF-V6400D only) If the monitored video is delayed in time with respect to the audio from the speakers, the audio output timing can be delayed. 1 Select "LIP SYNC". [SETUP] [MULTI CONTROL ./5] [SETUP] 2 Set the delay time. Use [MULTI CONTROL ./5] to select the delay time. [SETUP] The delay time is adjusted from 0ms to 300ms in 10ms step. 3 Press [SETUP] to exit the setup mode. Setup English 25 HDMI setup HDMI setup The HDMI setup is required to use the component connected to the HDMI terminal or to use the HDMI control functions. HDMI SETUP MULTI CONTROL Setup HDMI SETUP MULTI CONTROL ../ HDMI setup flow The HDMI control functions can be set. 1 Enter the HDMI Setup mode. [HDMI SETUP] Use [MULTI CONTROL ./5] to select an item to set. [HDMI SETUP] Display Setting "AUDIO OUT" Sets the HDMI audio output destination. Adjusts the deviation in time between "LIP SYNC" (KRF-V6400D only) the output audio and video. Sets whether or not the HDMI control "LINK SET" functions are used. Interlocks power ON-OFF of components "POWER CONTROL"*1 by means of HDMI control. "EXIT" Exits the HDMI Setup mode. *1 This item can be set when "LINK SET" is set to "ON". 2 Set each item. See the followings for each HDMI control item. Audio Out This function selects whether the output destination of the audio input is the TV or this unit. 1 Select "AUDIO OUT". [HDMI SETUP] Use [MULTI CONTROL ./5]. [HDMI SETUP] 2 Set the HDMI audio output destination. [MULTI CONTROL ./5] [HDMI SETUP] Display Setting "AMP" Outputs the audio from the speakers connected to this unit. "TV" Outputs the audio from the TV connected to this unit. 3 Go to the next setting. • If "TV" is selected and the audio is not output or is interfered with by noise, set the audio output of the player component to PCM. • If "TV" is selected, adjust the volume on TV. 26 KRF-V6400D/KRF-V5450D Lip Sync (KRF-V6400D only) If the monitored video is delayed in time with respect to the audio from the speakers, the audio output timing can be delayed. 1 Select "LIP SYNC". [HDMI SETUP] Use [MULTI CONTROL ./5]. [HDMI SETUP] 2 Set the HDMI audio delay. [MULTI CONTROL ./5] [HDMI SETUP] Display Setting Corrects the deviation in time between the output audio and "AUTO" video automatically. Allows the user to correct the deviation in time between the "MANUAL" output audio and video manually. The deviation in time between the output audio and video is "OFF" not corrected. When "MANUAL" is selected, use [MULTI CONTROL ./5] to select the audio delay time and press [HDMI SETUP] to enter the setting. The delay time is adjusted from 0ms to 300ms in 10ms step. 3 Go to the next setting. • If the TV in use is not compatible with "AUTO", select "MANUAL". HDMI Link This function selects whether or not the volume control and input selection of this unit are interlocked with the operations of the connected components. 1 Select "LINK SET". [HDMI SETUP] Use [MULTI CONTROL ./5]. [HDMI SETUP] 2 Set the HDMI link on or off. [MULTI CONTROL ./5] [HDMI SETUP] Display Setting "LINK ON" The HDMI control functions are used. "LINK OFF" The HDMI control functions are not used. When "LINK ON" is selected, the "HDMI LINK READY" indicator on the front panel lights up. 3 If "LINK ON" is set, proceed to the setup. Power Control This function selects whether or not the power status of this unit is interlocked with the power ON/OFF and start of playback of the connected components. 1 Set the HDMI power control on or off. [MULTI CONTROL ./5] [HDMI SETUP] Display Setting Turning the TV ON/OFF also turns this unit ON/OFF with an "PWR ON" interlocked operation. The power ON/OFF status of this unit is not interlocked with the "PWR OFF" power ON/OFF status of the TV. Setup English 27 Preparation for playing music or movie Preparation for play...

Descargar ahora

Introduzca dos números de la imagen: