Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Wait until the measurement process completes. 13 The measurement is completed. When the measurement ends, a beep sounds and the measurement result appears on the TV screen. Tip The displayed unit of distance for models for US and Canada is feet. The unit of distance for models for countries/areas other than US and Canada is meters. You can change the unit of distance use in “Distance Unit” in the Speaker settings menu. 14 Press to select “Next.” 15 Press. ./. repeatedly to select..Y................ “Yes,”............ then press . 16 Press ./. repeatedly to select the auto calibration type, then press .. The measurement results are saved. Parameter Explanation Full Flat Makes the measurement of frequency from each speaker flat. Engineer Sets the frequency to one that matches that of the Sony listening room standard. Front Reference Adjusts the characteristics of all the speakers to match the characteristics of the front speaker. OFF Sets the auto calibration to off. 17 Press . The exit screen appears. When error codes appear When “Save auto calibration (auto speaker setup) results?” appears on the TV screen in step 14, you can select whether to confirm the warning (“Yes”) or not (“No”). Follow the instructions of the TV screen when you select “Yes.” For details on warning and error codes, see “Message list after auto calibration measurement” in “9: Calibrating the appropriate speaker settings automatically (Auto Calibration)” in the operating instructions. Note You cannot measure the speaker height of the surround speakers and the surround back speakers. Set the position of the surround speaker from the “Position” in the Speaker settings menu. Tips The size of a speaker (LARGE/SMALL) is determined by the low characteristics. The measurement results may vary, depending on the position of the optimizer microphone and speakers, and the shape of the room. It is recommended that you follow the measurement results. However, you can change those settings in the Speaker settings menu. Save the measurement results first, then try to change the settings if you want. Press on the remote when “Please Press ENTER” appears on the TV screen. Setting up other components You should set up each component so that take out sound is output from speakers correctly when you play back a connected component. The following case describes Sony components. Refer to the operating instructions supplied with each component. Sony Super Audio CD player Select a suitable playback area (multi-channel or 2 channel). Sound may come out from only the front speaker left/right when 2 channel is selected. After the setting The receiver is now ready to use. Refer to the operating instruction supplied with the receiver for details. Francais Calibrage automatique aux reglages appropries (Auto Calibration) Vous pouvez regler les enceintes pour obtenir automatiquement le son souhaite depuis toutes les enceintes raccordees a l’aide de la fonction de calibrage aut...