Votos - 0, Puntuación media: 5 ( )

Fabricar: Denon Tamaño del archivo: 4.8 mb Nombre del archivo: 7f7e7808-4ff6-fea4-5121-d47386277c97.pdf Idioma del manual:

Manual : Press the uibutton to select the speaker, then press the op button to adjust the volume. When the adjustments are completed, press the ENTER button to finish the test tone. [Variable range] –12dB ~ 0dB ~ +12dB Operating from the remote control unit Adjusting with the remote control unit using the test tones is only possible in the “Auto” mode and only effective in the STANDARD mode. The adjusted levels for the different modes are automatically stored in the memory. GAdjusting using test tonesH q Press the TEST button. Test tones are output from the various speakers. w Use the op button to adjust so that the volume is equal for all speakers. e When the adjustments are completed, press the TEST button again. • Speakers set to “None” in the Speaker Configuration settings are not displayed. • When “Channel Level” is adjusted, the adjusted values are set for all the surround modes. To adjust the channel level separately for the different surround modes, use the operation see page 35. Operations (vpage 19) ENGLISH Input Setup Use this procedure to select the input source and make the settings related to playing input sources. a, s HDMI In Assign d ~ h Digital In Assign j iPod Assign k EXT. IN Subwoofer Level l Auto Preset Memory A0 Antenna Aiming a, s HDMI In Assign Select HDMI connector to assign to this source. [Display] 1.Sp 2.In 3.Op WInput Setup W1 HDMI1 DVD W2 HDMI2 TV d ~ h Digital In Assign Select digital input connector to assign to this source. [Display] 1.Sp 2.In 3.Op WInput Setup W3 COAX1 DVD W5 OPT1 CD jiPod Assign Assign Control Dock for iPod to this source. [Display] 1.Sp 2.In 3.Op WInput Setup W7 iPod VCR [Assignable input sources] Getting Started Connections Setup Remote Control Information Troubleshooting CD AUX CDR DVD/HDP TV/CBL VCR V.AUX Playback [Input terminals] COAXIAL1 COAXIAL2 OPTICAL1 OPTICAL2 With the default settings, the Control Dock for iPod can be used connected to the VCR (iPod) connector. [Assignable input sources] CD AUX CDR DVD/HDP TV/CBL VCR V.AUX Input terminals COAXIAL1 COAXIAL2 OPTICAL1 OPTICAL2 Default setting DVD/HDP TV/CBL CD VCR kEXT. IN Subwoofer Level Set the subwoofer level for playback. Select according to the player in use. [Display] 1.Sp 2.In 3.Op WInput Setup W8 EXT.In SW +15 [Input terminals] HDMI1 HDMI2 [Assignable input sources] DVD/HDP TV/CBL VCR V.AUX Input terminals HDMI1 HDMI2 Default setting DVD/HDP TV/CBL [Selectable items] 0dB +5dB +10dB : Select according to the player in use. • With HDMI, the video and audio signals are transferred simultaneously. (The HDMI audio signal is output from the monitor.) At this time, set the input mode to “Auto”. This is the recommended level. • The audio signals input from the analog, digital and EXT. IN connectors are not output to the monitor. +15dB : Operations (vpage 19) ENGLISH Getting Started Connections Setup Playback Remote Control Information Troubleshooting lAuto Preset Memory Use the auto preset function to program radio stations. [Display] 1.Sp 2.In 3.Op WInput Setup W9 Preset W< TER:3 a ~ d Volume Control Set the main zone volume setting. [Display] 1.Sp 2.In 3.Op EOption Setup E1 Limit OFF E2 P.On LAST E3 Mute FULL Option Setup Make various other settings. a ~ d Volume Control f Auto Surround Mode g Remote ID Setup Satellite Indicate satellite signal strength. Make a setting for maximum volume. [Selectable items] OFF –20dB –10dB 0dB : Do not set a maximum volume. : Set the maximum volume to –20 dB. : Set the maximum volume to –10 dB. : Set the maximum volume to 0 dB. Power On Level This sets the volume set when the main zone’s power is turned on. [Selectable items] Last – – – : Use the memorized setting from the last session. : Always use the muting on condition when power is turned on. –80dB ~ +18dB : Set the volume level when the power is turned on in units of 1 dB. Mute Level This sets the amount of attenuation of the volume when the mute mode is set in the main zone. [Selectable items] Full –40dB –20dB : The sound is cut off entirely. : The sound is attenuated by 40 dB. : The sound is attenuated by 20 dB. Operations (vpage 19) ENGLISH fAuto Surround Mode Make setting for memorizing surround mode setting for each input signal type. [Display] 1.Sp 2.In 3.Op EOption Setup E4 AutoSurr. ON [Selectable items] ON : Memorize settings. Most recently stored surround mode is automatically selected. OFF : Do not memorize settings. Surroun...

Descargar ahora

Introduzca dos números de la imagen: