Votos - 1, Puntuación media: 4
(
)
)
|
Resumen del manual
Order 41J9845 emitter.) –2728R31971Guide, tracking, motor end (order with 28R3194). Adhesive plastic sticker. Reduces friction between belt and metal sides. –41J7676M6 x 19 Black screw for security shield (not shown) –2841J76782Security shield –2941J95441Capacitor box, 230V –2941J95461Capacitor box, 115V –40M94231Capacitor box cable (provides power to the conveyor motors) (not shown) –3041D97851Curtain support, RH (for standard lane with 19 inch belt) –3041D97861Curtain support, RH (for wide lane with 25 inch belt) –3041D98031Curtain support, LH (for standard lane with 19 inch belt) –3041D98041Curtain support, LH (for wide lane with 25 inch belt) –3241D97841Cap, tower (one on each side) –3244M21891Curtain detector/emitter sensor assembly (matched set) (located in the curtain tower) –3341D97871Tower, rear curtain support (for standard lane with 19 inch belt) –3341D97881Tower, rear curtain support (for wide lane with 25 inch belt) –3444M22321Curtain guard, customer side (for wide lane with 25 inch belt) –41J84144Cable, curtain sensor fanout dongle (not shown) –41J83361Wire cord clips (bag of 10) –42H11611Cable tie (not shown) –NOTE: Hardware items such as screws, bolts, nuts, and washers removed during the disassembly of parts should be retained for use during re-assembly of those parts. Screws, bolts, nuts, and washers can not be ordered separately, they are available as part of a field kit. See Chapter 12, “Field Kits and Tools,” on page 101 for a listing of screws, bolts, nuts, and washers contained in each field kit. –41E17484Transition plate extension cable –41E17492Sensor extension cable Assembly 24: (continued) Updated October 16, 2007 62 Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3 Chapter 4. Transport Conveyor Assembly 25: Transport Conveyor . . . . . . . . . . . . . . . . . .64 Updated October 16, 2007 © Copyright IBM Corp. 2006, 2007 63 Assembly 25: Transport Conveyor 212019181716151312111098765421414314 Updated October 16, 2007 64 Self Checkout 4845: Parts Manual Models 131, 15x, 171, 6xx, 8xx, and BW3 Asm– Index PartNumber Units Description 25–See “How to Use This Parts Manual” on page v for general parts manual information, including ordering parts. See “Identifying a Right Hand or Left Hand Model” on page v for how to identify left hand and right hand models. –41J74341Transport conveyor assembly, 19 in., 115V –44M18991Transport conveyor assembly with Sensormatic, 19 in., 115V, right hand –44M19001Transport conveyor assembly with Sensormatic, 19 in., 115V, left hand –41J74381Transport conveyor assembly, 19 in., 230V –41J74421Transport conveyor assembly, 25 in., 115V –44D04051Transport conveyor assembly with Sensormatic, 25 in., 115V, right hand –44D04071Transport conveyor assembly with Sensormatic, 25 in., 115V, left hand –41J74461Transport conveyor assembly, 25 in., 230V –128R31961Guide, tracking, motor end (order with 28R3195). Adhesive plastic sticker. –228R31891Belt, transport conveyor (for standard lane with 19 inch belt) –228R32741Belt, transport conveyor (for wide lane with 25 inch belt) –341D97691LED light visor mount (not shown, located on motor cable) –441J93101Motorized pulley, 19" conveyor 115-60hz, unbalanced (transport only) –441D98181Motorized pulley, 19" transport conveyor 230V –441J93181Motorized pulley, 25" conveyor 115-60hz, unbalanced (transport only) –441D98201Motorized pulley, 25" transport conveyor 230V –541J84381Crossbar, conveyor frame (for standard lane with 19 inch belt) –528R32791Crossbar, conveyor frame (for wide lane with 25 inch belt) –628R32981Roller (for standard lane with 19 inch belt) –628R32751Roller (for wide lane with 25 inch belt) –728R31971Guide, tracking, motor end (order with 28R3194). Adhesive plastic sticker. –841J76662Bracket, drive isolation. Large black coupling. Use to adjust and isolate motor. (one on each side) –928R32852Drive roller retaining angle (one on each side) –1028R32832Block, idler roller (one on each side) –1128R32842Bracket, tensioner (one on each side) –1228R31721Nosebar adjusting angle –1341J74261Plate, side, transport conveyor, left side –1441J69281Emitter/detector bracket, bagging area full sensor –1541D71461Emitter, bagging area full sensor (for standard lane with 19 inch belt) –1541J84501Emitter, bagging area full sensor (for wide lane with 25 inch belt) –1628R31951Guide, tracking, motor end (order with 28R3196). Adhesive plastic sticker. –1741J74481Assembly, nosebar, (for standard lane with 19 inch belt) (Replaces 28R7098) –1741J74501Assembly, nosebar, (for wide lane with 25 inch belt) (Replaces 28R7084) –1841J83321Skid plate, (for standard lane with 19 inch belt), no Sensormatic –1844M19131Skid plate with Sensormatic opening, (for standard lane with 19 inch belt), right hand –1844M19141Skid plate with Sensormatic opening, (for standard lane with 19 inch belt), left hand –1841J83341Skid plate, (for wide lane with 25 inch belt), no Sensormatic –1928R31941Guide, tracking, motor end (order with 28R3197)...
Otros modelos de este manual:dispositivos robóticos - 131 (6.69 mb)
dispositivos robóticos - 15x (6.69 mb)
dispositivos robóticos - 171 (6.69 mb)
dispositivos robóticos - 8xx (6.69 mb)