Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
Ref. No. 7)............................... 1 complete assembly only). Incl. wire assy., w/connectorto large solenoid stud (red wire); wire 7 1904548 Decal-ignition switch instruc....... 1 assy, w/connector to small 8 1908112 Key Switch-includes two ignition keys (Ref. No. 9), one lockwasher, and one mounting solenoid stud (red wire); wire assy, w/connector to solenoid grounding screw (red wire); wire nut (lock-washer and nut not assy w/connector to engine ground available separately)................. 1 shut-off (green wire); plastic 9 96520 Key—ignition, one pair.................. 1 protector tube; wire harness; 10 9566 Bolt-carriage, 1/4-20 x 1-1/4"..... 2 connector; wire terminal.......... 1 11 1100241 Lockwasher-spring lock, 1/4"...... 2 29 1908117 Wire Harness-for Kohler engine. 12 1186229 Nut-hex, 1/4"-20......................... 4 Incl. two receptacles; three red 13 9092B Battery-12 volt, 30 amps., side-vented. (incl. Ref. No. 24)........ 1 wires (solenoid activate, battery recharge, and starter switch); 14 96514 Solenoid—starter, includes nuts and washers for cables and wires... 1 two green (ground)(shutoff) wires; plastic harness tube....... 1 15 1100242 Lockwasher-5/16"....................... 2 30 1186389 Locknut-hex, 1/4"-20.................. 2 16 1186211 Nut-hex, 5/16"-24....................... 2 31 20421 Wire-ground............................... 1 17 1187559 Lockwasher-external tooth, #10.. 1 32 1901202 Cable-ground, solenoid to engine 18 1186208 Nut-hex, #10-32.......................... 1 block........................................ 1 19 96510 Cable—solenoid to starter motor.. 1 33 1186331 Bolt—flange lock, 5/16-18x1“...... 1 20 2571 Battery Bracket............................ 1 34 1186391 Nut-flange lock, 5/16"-18............ 1 21 1186349 Bolt-flanged hex hd., 3/8-16x1-1/2“......................... 2 17 MODELS 12068, 12069, 12070, 12071, 12087, 12087C, 12088, 12088C, 12089, 120890,12090, 12090C, 12166 # 12584 DOZER/SNOW BLADE ATTACHMENT (Figure 10) NOTE: The Bumper Attachment (see Page 19) must be purchased and mounted on the tiller before the Dozer/Snow Blade Attachment can be used. REF No. PART No. DESCRIPTION OTY. 12584 Dozer/Snow Blade Kit-(incl. Ref. No.’s 1 through 16)..................... 1 1900780001 Blade - dozer/snow blade............ 2 1100057 Bolt - hex hd., 1/2-13x3"............ 3 1110110 Locknut-hex, 1/2"-13................. 4 1900781001 Pin - index, blade angle adjust..... 5 1100064 Bolt - hex hd., 1/2-13x1-1/2"..... 6 9905 Washer - plain, 1/2"..................... 7 1416 Bushing....................................... 8 1100808 Bolt - hex hd., 5/16-18 x 1-1/4"... REF No. PART No. DESCRIPTION 9 1909773001 Bracket - swivel (“A" frame)...... 10 1909774001 Bracket - dozer mounting......... 11 1100779 Bo It - hex hd., 5/16-18 x 1 -3/4" 12 1100245 Lockwasher - spring lock, 1/2". 13 1186233 Nut - hex, 1/2"-13..................... 14 1100242 Lockwasher - spring lock 5/16” 15 1186230 Nut-hex, 5/16" x 18................. 16 1107382 Washer-plain, 5/16", S.A.E...... QTY. 18 MODELS 12068, 12069, 12070, 12071, 12087, 12087C, 12088, 12088C, 12089, 12089C,12090, 12090C, 12166 BUMPER ATTACHMENT (Figure 11) \ REF No. PART No. DESCRIPTION QTY. — 12588 Bumper Attachment. Includes 6 1100242 Lockwasher - spring lock, 5/16".. 2 Ref. Nos. 1 through 11)........... 1 7 1186230 Nut - hex, 5/16"-18...................... 2 1 1910730001 Brace - bumper bottom............... 1 8 1910731001 Bumper wraparound.................... 1 2 1909765 Bolt-hex hd., 1/2-13 x 1-1/2“..... 1 9 1100046 Bolt-hex hd., 3/8-16x1”............ 2 3 1100245 Lockwasher - spring lock, 1/2”.... 1 10 1100243 Lockwasher - spring lock, 3/8".... 2 4 1909748 Spacer, 1/2"................................. 1 11 1448 Decal - for bumper...................... 1 5 1100799 Bolt - hex hd., 5/16-18x1-1/2”... 2 REF No. PART No. DESCRIPTION QTY. 19 MODELS 12068, 12069, 12070, 12071, 12087, 120870, 12088, 120880, 12089, 120890,12090, 120900, 12166 KICKSTAND ATTACHMENT (Figure 12) No. No._DESCRIPTION_QTY. KICKSTAND ATTACHMENT 12580 Kickstand—complete (incl. Ref. No.’s 1 through 12). Kickstand attaches to lower brace of bumper attachment (1932)...... 1 1 1904520001 Leg-kickstand............................. 2 1904521001 Plate-kickstand mounting........... 3 1492 Spring-kickstand......................... 4 9336 Pin-clevis.................................... 5 1111606 Bolt-hex hd., 5/16-18x2", Grade 5.................................... 6 9902 Washer-flat, 5/16", S.A.E............. 7 9473 Bushing—.438"lg. (.313" O.D., .275" i.D.)................................. 8 1100242 Lockwasher-spring lock, 5/16".... 9 1186230 Nut-hex, 5/16"-18....................... 10 9567 Screw-flat hd., 1/4"-20x 1-1/2"... 11 1100241 Lockwasher-spring lock, 1/4"...... 12 1186229 Nut-hex, 1/4"-20......................... TINE ATTACHMENT CRADLE ...
Otros modelos de este manual:Herramientas de jardín - 12087C (2.11 mb)
Herramientas de jardín - 12088C (2.11 mb)