Votos - 3, Puntuación media: 4.3 ( )

Fabricar: American Standard Tamaño del archivo: 232.58 kb Nombre del archivo: Idioma del manual:

& Max. lines on the PLASTER GUARD (1). ■ Complete all tiling and wall work. When walls are finished remove PLASTER GUARD (1). M968617 Rev.1.2 3 INSTALL BODY SPRAY Remove the PLASTER GUARD (1) if not already removed. Make sure the O-RING (2) and FLANGE GASKET (6) are installed on the BODY SPRAY (3). Thread BODY SPRAY (3) into the ELBOW (4). Tighten BODY SPRAY (3) using WRENCH (5) supplied until flush against finished wall and FLANGE GASKET (6) is compressed. Turn on water supply and test installed BODY SPRAY (3) for leaks and proper operation. 4 FINISHED WALL- INSTALL ESCUTCHEON Align ribs on back of ESCUTCHEON (1, 2), with slots in BODY SPRAY (3). Push ESCUTCHEON (1, 2) against BODY SPRAY (3) until ESCUTCHEON (1, 2) snaps into place. Turn on water supply and test installed BODY SPRAY (3) for leaks and proper operation. -ALIGNMENT RIBS ON BACK OF ESCUTCHEON 3 1 CARE: DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH. DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE. M968617 Rev. 1.2 5...

Descargar ahora

Introduzca dos números de la imagen: