Votos - 4, Puntuación media: 4.3
(
)
)
|
Resumen del manual
• Use pipe thread sealant such as PST on all threaded joints. • Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier. Tools Required for Installation • Medium Sized Crescent Wrench • Pipe Thread Sealant • Phillips Screwdriver • 7/16” Drill Bit Installation Instructions READ BEFORE INSTALLATION: Before removing any existing T&S, Chicago, CHG, or Dormont hardware, read the instructions on next page labeled “EZ Install Adapter Instructions” 1. Insert the eccentric gasket into the groove on the eccentric. Making sure gasket is in place, loosely mount the eccentric and fl ange onto the control valve body. 2. Mount control valve body to either a wall with male supply nipples, or a backsplash with nipples (not included). Be sure to use pipe thread sealant on the supply nipple threads. Adjust the eccentrics as needed in order to mount the control valve level. Once level, tighten the eccentrics. 3. To install the wall bracket, fi rst attach the rod adjuster to the rod. Do not completely screw the adjuster onto the rod in case some future adjustment is necessary. Using one of the small screws, attach the rod adjuster to the faucet spout. Attach the other end of the rod to the wall bracket fl ange using the other small screw. To complete wall bracket installation, attach the fl ange to the wall or backsplash using the longer wall screws. Step 1 Step 2 Step 3 1/2” NPT Supply Nipples (not included) O7/8” 1/2” Nipple Kit (optional) Elbows (optional) Installation Instructions Continued Fisher Washer EZ Install Adapter Gasket EZ Install Adapter Instructions If replacing T&S, Chicago, CHG, or Dormont Faucets, use the EZ Install Adapter that is included with your Fisher faucet to simplify installation. 1. Remove existing faucet by unthreading connecting nut. 2. Place new washer into fi tting. Thread in Fisher EZ Install Adapter. 3. Using another new washer, mount the new Fisher faucet onto the EZ Install Adapter and tighten. Discard the eccentrics supplied with new Fisher faucets. Fisher Washer EZ Install Adapter New Fisher Faucet Eccentric Flange Screw Wall Flange Rod Rod Adjuster Screw Remove Old Control Valve Step 1 Step 2 Step 3 ...
Otros modelos de este manual:Fontanería - 2445 (327.45 kb)