Votos - 0, Puntuación media: 5 ( )

Fabricar: Adaptec Tamaño del archivo: 137.86 kb Nombre del archivo: bb395513-2929-49cd-a675-d5a209dda8b7.pdf Idioma del manual:

< :> indicates the ‘or’ condition. For which user has a choice for the options listed within, and only one can be specified. <~> indicates the value range. For which user has a choice for the values within the range, and only one can be specified. <,> indicates a separation between integer values. ACCUSYS, INC. 5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C. TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE PROJECT “DESKTOP RAID” DOCUMENT STATUS OFFICIAL RELEASE REV. G–05-NOV-2007 PAGE 11 OF 27 3.2 CLI Reply Status • InBand(Controller) command success. • InBand command failed. CLI will display “Reason: ”. • Invalid command: CLI receives unrecognized commands. • Invalid parameter “Param”: CLI receives incorrect parameter of the input command. CLI will display the command usage when this error occurs under the interactive mode. • Syntax error: Parameter(s) of the input command doesn’t match the command syntax. CLI will also display the command usage under the interactive mode. • Other errors: . ACCUSYS, INC. 5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C. TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE PROJECT “DESKTOP RAID” DOCUMENT STATUS OFFICIAL RELEASE REV. G–05-NOV-2007 PAGE 12 OF 27 3.3 CLI Command Set 3.3.1 Basic CLI Commands 3.3.1.1 Command Name Command Description Main Use this command to show the main information page, which lists all available CLI commands with brief descriptions. Parameter Description N/A 3.3.1.2 Command Name Command Description CtrlIndex Use this command to set a specified controller to be active. The default controller will be set to controller 0 if it exists. Parameter 1 Parameter Description Controller index: <0~n> Controller index: <0~n>, where n stands for the maximum index number of the available controller(s). 3.3.1.3 Command Name Command Description CheckPassword Use this command to verify password of the active controller. The controller commands can only be issued after the password being verified. Parameter 1 Parameter Description Password: Password: CHARS must be an 8-character alphabetic string. Example CLI>CheckPassword 00000000 [Enter] If 00000000 is a correct password for the active controller, then CLI will return success and the controller can receive commands normally after that. ACCUSYS, INC. 5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C. TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE PROJECT “DESKTOP RAID” DOCUMENT STATUS OFFICIAL RELEASE REV. G–05-NOV-2007 PAGE 13 OF 27 3.3.1.4 Command Name Command Description SetPassword Use this command to set password of the active controller. Parameter 1 Parameter Description Password: Password: CHARS must be an 8-character alphabetic string. 3.3.1.5 Command Name Command Description CtrlName Use this command to set controller name of the active controller. Parameter 1 Parameter Description Controller Name: Controller Name: CHARS may not exceed 16 characters. Example CLI>CtrlName Ctrl1 [Enter] The controller name will be set to ‘Ctrl1’. If the number of characters in parameter 1 is more than 16, the additional characters will be ignored. 3.3.1.6 Command Name Command Description RunScript Use this command to run CLI commands from a pre-written script file. Parameter 1 Parameter Description File Path: <[DIR] > File Path: Specify an existing script file(FileName) located in the specified directory. Example(Under Linux environment) CLI> RunScript /tmp/script1 [Enter] CLI will start to run commands written in the script file ‘script1’ 3.3.1.7 Command Name Command Description Exit Use this command to quit CLI command line interface. Parameter Description N/A ACCUSYS, INC. 5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C. TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE PROJECT “DESKTOP RAID” DOCUMENT STATUS OFFICIAL RELEASE REV. G–05-NOV-2007 PAGE 14 OF 27 3.3.2 Information Display Commands 3.3.2.1 Command Name Command Description DumpArrayInfo Use this command to display information of the specified array. Parameter 1 Parameter Description Array No.: <1~4> Array No.: Specified array number from 1 ~ 4 for information display. Example CLI>DumpArrayInfo 1 [Enter] CLI will display the information of Array 1 if it exists. T3.3.2.2. Command Name Command Description DumpSliceInfo Use this command to display slice information of the specified array. Parameter 1 Parameter Description Array No.: <1~4> Array No.: Specified array number from 1 ~ 4 to display slice information. 3.3.2.3 Command Name Command Description DumpJBODInfo Use this command to display JBOD information of the active controller. Parameter Description N/A 3.3.2.4 Command Name Command Description DumpCtrlEvent Use this command to display event(s) of the active controller. CLI will display up to 32 latest events(if any) each time when this command has been issued. Parameter Description N/A 3.3.2.5 Command Name Command Description DumpCtrlInfo Use this command to display ...

Descargar ahora

Introduzca dos números de la imagen: