Votos - 2, Puntuación media: 5 ( )

Fabricar: 3Com Tamaño del archivo: 137.86 kb Nombre del archivo: bb395513-2929-49cd-a675-d5a209dda8b7.pdf Idioma del manual:

ACCUSYS, INC. 5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C. TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE PROJECT “DESKTOP RAID” DOCUMENT STATUS OFFICIAL RELEASE REV. G–05-NOV-2007 PAGE 20 OF 27 3.3.4.3 Command Name Command Description RebuildParity Use this command to rebuild parity of an array which contains parity. i.e. RAID 5 or RAID 6. Parameter 1 Parameter Description Array No.: > Array No.: Specify an array number to rebuild parity. Status setting: Start or stop the parity rebuilding of the specified array. Parameter 2 State setting: > Example CLI>RebuildParity Array=1 State=Start [Enter] Array 1 will start to rebuild parity if it exists and is configured as RAID 5 or RAID 6. 3.3.4.4 Command Name Command Description VerifyParity Use this command to verify parity of an array which contains parity. i.e. RAID 5 or RAID 6 Parameter 1 Parameter Description Array No.: > Array No.: Specify an array number to verify parity. Status setting: Start or stop the parity verification of the specified array. Parameter 2 State setting: > 3.3.4.5 Command Name Command Description RefreshArray Use this command to refresh data of the specified array. Parameter 1 Parameter Description Array No.: > Array No.: Specify an array number to be refreshed. State setting: Start, stop the array refreshment or just pause the refreshment and restart it with ‘State=Start’ parameter any time after it has been paused. Parameter 2 State setting: > Example CLI>RefreshArray Array=1 State=Start[Enter] Array 1 will start to refresh data if it exists. ACCUSYS, INC. 5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C. TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE PROJECT “DESKTOP RAID” DOCUMENT STATUS OFFICIAL RELEASE REV. G–05-NOV-2007 PAGE 21 OF 27 3.3.4.6 Command Name Command Description RefreshPriority Use this command to set the priority of array refreshment. This setting would be applied to all arrays which are being refreshed. Parameter 1 Parameter Description Select the priority for array refreshment function. 3.3.4.7 Command Name Command Description UnlockDrive Use this command to unlock a locked drive. Parameter 1 Parameter Description Drive No.: <1~n> Drive No.: <1~n>, where n stands for the maximum locked drive number. 3.3.5 Mirror Snapshot Configuration Commands 3.3.5.1 Command Name Command Description CreateShot Use this command to create a mirror snapshot. Parameter 1 Parameter Description Shot No.: > Shot No.: Specify the mirror snapshot number to be created. Source Array No.: SourceArray =1~4, uses an array as the source shot. SourceJBOD=1~n, uses JBOD as the source shot. Backup Array No.: BackupArray =1~4, uses an array as the backup shot. BackupJBOD=1~n, uses JBOD as the backup shot. Slice No.: This parameter is not needed when parameter 2 or parameter 4 uses JBOD. Parameter 2 Source Array No.: : SourceJBOD=<1~n>> Parameter 3 Source Slice No.: > Parameter 4 Backup Array No.: : BackupJBOD=<1~n>> Parameter 5 Backup Slice No.: > Example CLI>CreateShot Shot=1 SourceArray=1 SourceSlice=0 BackupJBOD =1 [Enter] Shot 1 will be created and data in slice 0 of Array 1 will start to backup to JBOD1 if all parameters meet legal conditions. ACCUSYS, INC. 5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C. TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE PROJECT “DESKTOP RAID” DOCUMENT STATUS OFFICIAL RELEASE REV. G–05-NOV-2007 PAGE 22 OF 27 3.3.5.2 Command Name Command Description DeleteShot Use this command to delete a mirror snapshot. Parameter 1 Parameter Description Shot No.: Shot No.: <1~8> Specify an existing mirror snapshot to be deleted. 3.3.5.3 Command Name Command Description ResyncShot Use this command to resynchronize a mirror snapshot. Parameter 1 Parameter Description Shot No.: Shot No.: <1~8> Specify an existing mirror snapshot to be resynchronized. 3.3.5.4 Command Name Command Description SplitShot Use this command to split a mirror snapshot. Parameter 1 Parameter Description Shot No.: Shot No.: <1~8> Specify an existing mirror snapshot to be split. 3.3.5.5 Command Name Command Description SplitSchedule Use this command to schedule the split time of the specified mirror snapshot. Parameter 1 Parameter Description Shot No.: > Shot No.: Specify an existing mirror snapshot to assign split schedule. Year: Year=xx means Year 20xx. Parameter 2 Year: > Parameter 3 Example Month: > CLI>SplitScheduling Shot=1 Year=07 Month=12 Day=15 Hour=0 Min=0 [Enter] Shot 1 will start to split at 2007/12/15 0:0 if shot 1 exists and has not been split yet. Parameter 4 Day: > Parameter 6 Hour: > Parameter 7 Minute: > ACCUSYS, INC. 5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C. TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE PROJECT “DESKTOP RAID” DOCUMENT STATUS O...

Descargar ahora

Introduzca dos números de la imagen: