Votos - 4, Puntuación media: 3.5 ( )

Fabricar: 3Com Tamaño del archivo: 3.8 mb Nombre del archivo: Idioma del manual:

When the drive light remains off for 30 seconds, the system is booted up. (See the Non-“H” Server Specifications section and the “H” Server Specifications section for a description of front panel LED indicators and buttons.) If you wish to verify that the unit has been booted up, you can perform the following test on your workstation: 1. Go to your taskbar and click Start > Run. 2. In the dialog box, type in cmd (type in command if using Windows ME). 3. Click OK. 4. In the cmd.exe window, type in ping 1.2.3.4 5. Press Enter on your keyboard. If you receive a reply, the unit is up. Network Setup When the ER is fully booted, you can configure network settings. For this step, you will need your network administrator to provide you the host name, gateway address, and one unused IP addresses. Access the Internet A. Launch Internet Explorer from the setup workstation. B. Type in in the address field. C. Click Go to open the login screen of the Administrator console application: Log in to the Administrator Console In the login screen, you need to enter the generic User Name and Password. A. In the User name field, type in admin. B. In the Password field, type in reporter. C. Click OK to go to the main screen of the Administrator console: Network Settings A. From the Network menu at the top left of the screen, choose Network Setting to display the Network Settings screen in which you enter LAN settings the ER will use on your network: B. Enter the Host Name that includes your domain name. For example: er.myserver. com. This must be a valid DNS entry. C. Enter the LAN 1 IP address of the ER server. This IP address must be FTP-accessible via the Web access logging device, and via port 3306 from the client workstation that will run the reports. D. Enter the Netmask (subnet) that will define the traffic designated for the LAN. E. Enter the Gateway IP address for the default router or firewall that is the main gateway for the entire network segment. F. Enter the First DNS IP address of the primary Domain Name System (name server). The server will use this IP address to identify IP addresses on the network. G. Enter the Second DNS IP address of the fallback DNS. WARNING: Be sure to make note of the IP addresses and host name you assigned to the ER. It is strongly suggested you document and save a copy of these entries since they are now the only way to communicate with the ER. H. Click Save. Regional Setting: Time Zone A. From the Network menu, choose Regional Setting to display the Regional Setting screen in which you specify the geographic region of the ER, select the language set to display in the console, and then select the Network Time Protocol (NTP) servers the ER will use for time synchronization with Internet clocks: B. At the Region pull-down menu, select your country from the available choices. C. At the Location pull-down menu, select the time zone for the specified region. D. Click Save. Regional Setting: Language A. If ne...

Descargar ahora

Introduzca dos números de la imagen: