Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Note: By default, the WG602 is a DHCP client. If there is no DHCP server in the network, the WG602 uses 192.168.0.227 as its IP address. If your network used different addressing, you will need to configure the WG602 accordingly. d. Connect the power adapter to the wireless access point and plug the power adapter in to a power outlet. The power, LAN, and wireless lights should light up. 4 44Verify Wireless Connectivity Using a computer with an 802.11b or 802.11g wireless adapter with the correct wireless settings needed to connect to the WG602 (SSID, MAC ACL, WEP, WPA, etc.), verify connectivity by using a browser such as Netscape ® or Internet Explorer to browse the Internet, or check for file and printer access on your network. Note: If you cannot connect, see the Troubleshooting Tips on the next page or the Reference Manual on the 54 Mbps Wireless Access Point Resource CD. Troubleshooting Tips If you have trouble setting up your WG602, check the tips below. No lights are lit on the access point. The access point has no power. • Make sure the power cord is connected to the access point and plugged in to a working power outlet or power strip. • Make sure you are using the correct NETGEAR power adapter supplied with your access point. The Ethernet LAN light is not lit. There is a hardware connection problem. • Make sure the cable connectors are securely plugged in at the access point and the network device (hub, switch, or router). • Make sure the connected device is turned on. • Be sure the correct cable is used. Use a standard Category 5 Ethernet patch cable. If the network device has Auto Uplink™ (MDI/MDIX) ports, you may use a cross-over cable. See the Reference Manual on the 54 Mbps Wireless Access Point Resource CD for a full explanation of cable types. The Wireless LAN activity light is not lit. The access point’s antennas are not working. • If the Wireless LAN activity light stays off, disconnect the adapter from its power source and then plug it in again. • Make sure the antenna is tightly connected to the WG602. • Contact NETGEAR if the Wireless LAN light remains off. (Sticky Note comment Betsy Miller 14.09.2004 19:44:25 bar code to come) September 2004 I cannot configure the wireless access point from a browser. There is a configuration problem. Check these items: • The WG602 is properly installed, LAN connections are OK, and it is powered on. Check that the LAN port LED is green to verify that the Ethernet connection is OK. • If you are using the NetBIOS name of the WG602 to connect, ensure that your PC and the WG602 are on the same network segment or that there is a WINS server on your network. • If your PC uses a Fixed (Static) IP address, ensure that it is using an IP Address in the range of the WG602. The WG602 default IP Address is 192.168.0.227 and the default Subnet Mask is 255.255.255.0. See the Reference Manual on the 54 Mbps Wireless Access Point Resource CD for more details. I cannot access the Internet or the LAN with a wireless capable computer. There is a configuration problem. Check these items: • You may not have restarted the computer with the wireless adapter to have TCP/IP changes take effect. Restart the computer. • The computer with the wireless adapter may not have the correct TCP/IP settings to communicate with the network. Restart the computer and check that TCP/IP is set up properly for that network. The usual setting for the Windows Network Properties is to be set to “Obtain an IP address automatically. ” • The access point’s default values may not work with your network. Check the access point default configuration against the configuration of other devices in your network. • For full instructions on changing the access point’s default values, see the Reference Manual on the 54 Mbps Wireless Access Point Resource CD. Technical Support PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT SHIPPED WITH YOUR PRODUCT. By registering your product at we can provide you with faster expert technical support and timely notices of product and software upgrades. NETGEAR, INC. Support Information Phone: 1-888-NETGEAR (For US & Canada only) - 24 x 7 phone support See Support information card for other countries. E-mail: support@NETGEAR.com (24 x 7 online support) ! 0984 Attention: When you configure the wireless settings of this device please make sure to select the correct country settings. Due to EU-law the country settings must be identical to the country, where the device is operating (important due to non-harmonized frequencies in the EU). ©2004 NETGEAR, Inc. NETGEAR, the Netgear logo, The Gear Guy and Everybody's Connecting are trademarks or registered Netgear, Inc. in the United States and/or other countries. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/Other brand and product names are trademarks or registered trademarks their respective holders. Information is subject to chang...