Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
The basic installation and configuration instructions below assume that your wireless network connection will be to an access point, and you are not using WEP security. Please refer to the Reference Manual on the WG311 54 Mbps Wireless PCI Adapter Resource CD for detailed instructions on configuring WEP, using Ad-Hoc mode, or using advanced options. Windows XP Basic Installation 1. First, install the WG311 software. a. Power on your desktop and log into the Windows Operating System b. Insert the WG311 54 Mbps Wireless PCI Adapter Resource CD into your CD-ROM drive. The CD main page shown below will load. c. Click the Install Driver & Utility link. d. Follow the InstallShield Wizard steps, and click Finish when done. 2. Next, install the WG311 Wireless PC Card. a. Shut down the PC and remove the power cord from the PC. Insert the WG311 Wireless PCI Adapter into an available PCI slot. Connect the antenna to the adapter and position the antenna to up position. Reconnect the power cord and reboot the computer. b. After a short delay, the Found New Hardware Wizard displays. Note: If a Windows XP logo testing warning appears, click Continue Anyway to proceed. When installation is complete, you will see the WG311 system tray icon on the lower right portion of the Windows task bar. Windows XP will display a Wireless Network Connection message like this one. 3. Now, configure your WG311 a. Right click on the network icon in the Windows XP system tray to open the network options menu. b. Click on the View Available Wireless Networks menu item. If there is more than one wireless network in your vicinity, click on the one to which you will connect. c. Click on the Allow me to connect to the selected wireless network even though this is not secure check box. d. Click Connect. 4. Finally, verify wireless network connectivity. a. Open the WG311 utility by clicking on the icon in the Windows system tray. Note: When the Windows XP wireless configuration utility is selected, only these two tabs pages appear. To see the full NETGEAR utility, please refer to the Reference Manual on the 54 Mbps Wireless PCI Adapter WG311 Resource CD. b. Verify that your connection information matches your wireless network. c. Verify connectivity to the Internet or network resources. Note: If you are unable to connect, see troubleshooting tips in the Basic Installation section of the Reference Manual on the WG311 54 Mbps Wireless PCI Adapter Resource CD. Windows 2000, Me/98SE Basic Installation 1. First, install the WG311 software. a. Power on your desktop and log into the Windows Operating System. b. Insert the WG311 54 Mbps Wireless PCI Adapter Resource CD for the WG311 into your CD-ROM drive. The CD main page shown below will load. c. Click the Install Driver & Utility link. d. You can also enter a profile name and click on the Save Profile button to store current settings. d. Follow the InstallShield Wizard steps, and click Finish when done. 2. Next, install the WG311 Wireless PC Card. Tip: If you use your desktop PC to connect to a wireless network at work and at home, create profiles called work and home. Then, a. Shutdown the PC and remove the power cord from the PC. activate whichever one you need for wherever you are located. Insert the WG311 Wireless PCI Adapter into an available PCI slot. Reconnect the power cord and reboot the computer. 4. Finally, verify wireless network connectivity. b. After a short delay, the Note: You can also use the Networks tab to verify the availability of Found New Hardware wireless networks and their SSIDs. Please see the Reference Manual on Wizard displays. the 54 Mbps Wireless PCI Card WG311 Resource CD. Note: If a Windows 2000 a. Verify that your connection information matches your displays a Digital wireless network. Signature Not Found warning, click Yes to b. Verify connectivity to the Internet or network resources. continue the installation. Note: If you are unable to connect, see troubleshooting tips in the Basic Installation section of the Reference Manual on the When installation is WG311 54 Mbps Wireless PCI Adapter Resource CD. complete, you will see the WG311 system tray icon on the lower right portion of the Windows task bar. 3. Now, configure your WG311 a. Open the WG311 Smart Wireless Settings Utility by clicking on the icon the Windows system tray. The utility opens to the Settings page. b. Change the Network Name SSID to match your network. Tip: As an alternative to typing in the SSID, you can use the Network tab to view the available wireless networks, and double click on the desired network. c. Click the Apply button to activate the connection. *M-10116-01* M-10116-01 May 2003 Technical Support PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT SHIPPED WITH YOUR PRODUCT. By registering your product at we can provide you with faster expert technical support and timely notices of product and software upgrades. NETGEAR, INC. Support Information Phone: 1-888-NETGEAR...