Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
6. Wireless AP Settings: Click 'Next'. 7. Finsh: Click 'Finish'. After finishing the CPE configuration for the subscribers, please change the IP settings of your computer to 'Obtain an IP address automatically' and 'Obtain DNS server address automatically'. • Hotspot Hotspot application is used to provide Internet access for wireless devices such as smartphones, tablets and laptops. If the CPE is connected to a router, we recommend setting it in the Access Point mode. Smartphone Laptop Internet Router Access Point Tablet Refer to the following steps to configure the CPE. Configure the Access Point 1. Log in to PharOS 2. Go to the Quick Setup page 3. Operation Mode • Select 'Access Point'. • Click 'Next'. 4. LAN Settings: Click 'Next'. 5. WAN AP Settings • SSID: customize the name for the network as you like. • Security: select 'WPA-PSK/WPA2-PSK'. • PSK Password: create the password for the network as you like. • Click 'Next'. 6. Finish: Click 'Finish'. If the CPE is connected to a Modem, we recommend setting it in the AP Router mode. Smartphone Laptop Tablet Internet Modem AP Router Refer to the following steps to configure the CPE. Configure the AP Router (equal to a SOHO router) 1. Log in to PharOS 2. Go to the Quick Setup page 3. Operation Mode • Select 'AP Router'. • Click 'Next'. 4. WAN Connection Type *These settings may vary depending on the ISP. Please contact your ISP for the correct information. • Select 'Dynamic IP'. • Click 'Next'. 5. Wireless AP Settings • SSID: enter the name for the network as you like. • Security: select 'WPA-PSK/WPA2-PSK'. • PSK Password: enter the password for the network as you like. • Click 'Next'. 6. Finsh: Click 'Finish'. 17 Antenna Alignment In order to get the best performance, you can precisely align the direction of the CPE with the assistance of ' Wireless Signal Quality' on 'STATUS' page of the PharOS Web Interface. WISP WISP Adjust the direction of the CPE until the device reaches the highest SNR. Specifications HARDWARE FEATURES Dimensions CPE520/CPE220: 275.83*79*60.3mm CPE510/CPE210: 224.34*79*60.3mm Interface LAN0: 10/100Mbps Ethernet Port(PoE IN) LAN1: 10/100Mbps Ethernet Port GND: Grounding Terminal for Lightning Protection RESET: Button to restore the device to Factory Default Power Supply 24V Passive PoE Adapter Included ESD Protection1 15kV Lightning Protection1 Up to 6kV Operating Temperature -30. ~ 70. (-22.~158.) Operating Humidity 10% ~ 90% Certification CE, FCC, RoHS, IPX5 WIRELESS FEATURES Models CPE210 CPE220 CPE510 CPE520 Antenna Gain 9dBi 12dBi 13dBi 16dBi Horizontal Beamwidth/ Elevation Beamwidth2 70°/ 45° 45°/ 30° 45°/ 30° 50°/ 20° Maximum Transmit Power3 27dBm 30dBm 27dBm 30dBm Operating Frequency3 2.42.4835GHz 2.42.4835GHz 5.155.85GHz 5.155.85GHz 802.11 Standards 11b/g/n 11b/g/n 11a/n 11a/n Note: 1. Estimation is based on copper grounding cable and shielded CAT5e cable with ground wire. 2. Beamwidth values may vary throughout operating frequency. 3. Maxim...
Otros modelos de este manual:Equipo de red - CPE210 (5.1 mb)