Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
5 Known problems and limitations
•
Installation may hang when SATADVD-00 bundle versions 1203 or lower are upgraded to
later versions; this situation happens while /usr/lbin/utild daemon is active in the system.
utild is installed as a part of the Utilization Provider software.
Workaround:
To prevent the hang during installation of the driver, halt the utild daemon before you install
the satadvd driver. To halt the daemon and install the driver, follow these steps:
1.
Log in to the server as root.
2.
To comment the utild line out of the /etc/inittab file, follow these steps:
a.
Open the /etc/inittab file, as follows:
#vi /etc/inittab
b.
Locate the entry for the utild daemon. For example:
util:23456:respawn:/usr/lbin/utild # Utilization Provider
daemon
c.
Add a hash sign to the beginning of the line, then save the file. For example:
# util:23456:respawn:/usr/lbin/utild # Utilization Provider
daemon
3.
To implement the change to the inittab file, run init q.
4.
Use ps -ef |grep utild to ensure utild has halted.
◦
If /usr/lbin/utild does not appear, continue to Step 7.
◦
If /usr/lbin/utild remains active, see Step 5.
5.
Use ps -ef |grep utild to determine the PID (Process ID) of the utild daemon;
then use the kill -9 pid command to terminate the utild daemon.
For example:
# ps -ef | grep utild
root 200 1 0 Dec 5 ? 25:47 /usr/lbin/utild
root 8962 8949 1 11:00:46 pts/tc 0:00 grep utild
In this example, the PID (Process ID) is 200.
# kill -9 200
6.
Verify that utild does not appear in the process list. For example:
# ps -ef | grep utild
root 8969 8949 1 11:01:15 pts/tc 0:00 grep utild
#
If utild still appears in the process list, repeat steps 2 through 6.
4
...Otros modelos de este manual:
Equipo de red - HP-UX 11i v3 I/O Cards (183.05 kb)