Table 3 HP-UX 11i v3 October 2012 fixes — IEther-00 B.11.31.1210
SR number
Description
QXCR1001220405
After a LAN adapter port is reset, the statistics reported might reveal a large number of
Inbound Discards. Activity on the receive side might appear to be hung. The following LAN
adapter products could be impacted: AD221A, AD222A, AD393A, and rx2800 core
LAN-on-Motherboard (LOMs).1
1 The rx2800 LAN interface is on the system motherboard. This LAN adapter appears in ioscan output as “AH395-60001”.
Table 4 HP-UX 11i v3 September 2012 fixes — IEther-00 B.11.31.1209.01
SR number
Description
QXCR1001202598
False link status reported when NC360m or NC364m autonegotiation is OFF (Intel
82571mezzanine adapters only). When autonegotiation is OFF for the NC360m or NC364m
adapter, and the corresponding switch port is disabled, the LAN interface link status on the
system side is displayed by nwmgr and lanadmin as UP. It should be displayed as DOWN.
QXCR1001216397
Link status detection delay with NC360m and NC364m PCIe Ethernet mezzanine server blade
adapter (Intel 82571mezzanine adapters only). When a link is down, there is a significant
delay before the iether driver detects this and logs a nettl error. Reported delays range
from 2 to 36 seconds.
Table 5 HP-UX 11i v3 September 2012 fixes — IEther-00 B.11.31.1209
SR number
Description
QXCR1001194114
System fails to produce a crash dump after a soft reset (TOC). This results because the iether
driver crashes when initializing at the same time that the system is performing the TOC (transfer
of control).
Table 6 HP-UX 11i v3 April 2012 fixes — IEther-00 B.11.31.1204
SR number
Description
QXCR1001150789
When using the nwmgr command over the iether interface to change the mtu size to 9000,
the following error is observed:
#>nwmgr -s -A mtu=9000 -c lan
lan current values:
New MTU = ERROR: Invalid value
mtu : MTU
Maximum payload size for Ethernet frames.
Min: 257 Max: 9000 Default: 1500
Table 7 HP-UX 11i v3 March 2012 fixes — IEther-00 B.11.31.1203
SR number
Description
QXCR1001132541
When a guest VNIC is created over the iether interface, a synchronization issue in the
receive path between the host freeing used buffers and the guest shutting down causes the
HPVM host to panic.
QXCR1001169816
The iether driver causes reduced performance in other applications.
QXCR1001135225
After 15 reboots, two of the four AD339A ports go into the DOWN state.
5 Known problems and limitations
The following problems and limitations are known to exist in this release:
•
QXCR1001259174 — On blade systems with 2-port NC364m/445978-B21 and 4-port
NC360m/447883-B21 PCIe mezzanine 1GbE adapters, using APA aggregation configured
5 Known problems and limitations
5

---

...

Otros modelos de este manual:
Equipo de red - HP-UX 11i v3 I/O Cards (171.84 kb)