|
Otros manuales para este modelo:
Resumen del manual
WiFi Network Name and Password
Join the Router’s WiFi Network
2. Within two minutes, on your computer or WiFi device, press
its WPS button or click its onscreen WPS button.
The preset WiFi network name (SSID) and password (network
To connect your computer or WiFi device (such as a smartphone or
The WPS LED on the router lights solid green when the
key) are unique to your router, like a serial number. Because the
gaming device) to your router’s WiFi network, you can use either
computer or WiFi device connects to your router.
router automatically uses WiFi security, you don’t need to set it
the manual method or Wi-Fi Protected Setup (WPS) method.
up. The WiFi settings are on the product label.
3. Repeat this process to add other computers or WiFi devices.
Manual Method
Reset Router to Factory Settings
1. Open the software utility that manages your WiFi connections
You can return the router to its factory settings. Use the end of
on the computer or WiFi device that you want to connect to
your router.
a paper clip or a similar object to press and hold the WPS/Reset
button on the router until the Power LED
blinks green. The
This utility scans for all wireless networks in your area.
router resets and returns to the factory settings.
2. Find and select your router’s WiFi network name (SSID).
The SSID is on the product label.
Support
3. Enter the router’s password (or your custom password if you
changed it) and click the Connect button.
Thank you for purchasing this NETGEAR product.
After installing your device, locate the serial number on the label
The password is on the product label.
NETGEAR recommends that you use the preset WiFi settings
of your product and use it to register your product at
because you can check the product label if you forget them.
4. Repeat Step 1 through Step 3 to add other computers or WiFi
https://my.netgear.com. You must register your product before
NETGEAR genie lets you change these settings. If you do so, write
devices.
you can use NETGEAR telephone support. NETGEAR recommends
down the new WiFi settings and store them in a safe place.
registering your product through the NETGEAR website.
WPS Method
Find the preset WiFi settings on your router and record them here:
For product updates and web support, visit
If your computer or WiFi device supports WPS, you can use WPS
http://support.netgear.com. NETGEAR recommends that you use
WiFi network name (SSID)
to join the router’s WiFi network. For help with the WPS button
only the official NETGEAR support resources.
on your computer or WiFi device, check the instructions or online
Network key (password)
You can get this installation guide in multiple languages and the
help that came with that computer or WiFi device. Some older
user manual online at http://downloadcenter.netgear.com or
If you change the WiFi settings, write the new settings here for
equipment cannot use WPS.
through a link in the product’s user interface.
easy reference and store this booklet in a safe place.
Note: WPS does not support WEP security. If you are using WEP
For the current EU Declaration of Conformity, visit
WiFi network name (SSID)
security, use the manual method.
http://support.netgear.com/app/answers/detail/a_id/11621/.
Network key (password)
1. Press and quickly release the WPS/Reset button on the router
For regulatory compliance information, visit
with the end of a paper clip or a similar object.
http://www.netgear.com/about/regulatory/.
The WiFi LED
blinks green.
See the regulatory compliance document before connecting the
Note: If you do not quickly release the WPS/Reset button, the
power supply.
router will return to its factory settings.
NETGEAR, Inc.
August 2014
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered
350 East Plumeria Drive
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries.
San Jose, CA 95134, USA
Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.