Votos - 5, Puntuación media: 4.2
(
)
)
|
Resumen del manual
3. Select your Destination, then press . 4. In your source’s directory, locate the file that you want to copy to another location, then press . A red checkmark appears next to your selected file. 5. Press to go to your destination directory. Select the new location for your selected file. 6. Press to confirm the file copy. Sharing files via your media player The UPnP function in your HD media player allows you to stream shared media files such as photos, videos, or music from Windows® Media Player 11 or later version on your computer. Ensure that you have wired or wireless network connection. Refer to Chapter 3 for more details on connecting to a network. To share files on your media player: 1. Launch Windows® Media Player on your computer. 2. From the Library tab, click Media Sharing. 3. In the Media Sharing screen, tick Share my media to. 4. From the list, select the device that you want to share media files with, then click Allow. 4-1 Chapter 4 Troubleshooting Troubleshooting This section provides answers to some common problems that you may encounter while installing or using the ASUS O!Play HD media player. These problems require simple troubleshooting that you can perform by yourself. Contact ASUS Technical Support if you encounter problems not mentioned in this section. Display The media player does not work. You think that the problem might be with the media player’s power adapter. • The media player’s power adapter possibly performs the overload protection function — automatic shutdown during overload conditions, such as Over Current, Over Voltage, and Over Temperature. • Disconnect the media player’s power adapter and wait few minutes before you reinsert the player’s power adapter directly into an outlet. Turn on the media player again. • If the problem still exists, contact your retailer. The TV screen is blank and the media player power LED remains off. • Ensure that the TV is turned on. • Ensure that the media player’s power adapter and power outlet are functional. • Ensure that the media player’s power adapter plug is firmly attached to the rear panel of the player and to the power outlet. I cannot see the Setup Wizard when I turn on the player for the first time. The TV screen is blank and the media player power LED is on. • Ensure that the TV is turned on. • Ensure that the AV/HDMI cable is properly connected to the correct terminals on both the TV and the media player. • Ensure that your TV is switched to the appropriate video source (AV IN or HDMI). You may need to use your TV Remote control to change video sources. • Turn off your media player and wait for a few minutes before turning it on again or press the reset button at the left panel. Chapter 4: Troubleshooting 4-2 The TV screen is blinking and fuzzy. • Ensure that the AV/HDMI cable is properly connected to the correct terminals on both the TV and the media player. • Ensure that the media player power LED is on. • Ensure that the TV system setting matches the system used in your country. • Ensure that the correct video resolution option is selected. I cannot find any of my music, movie, or photo files. • Ensure that your Media Server (such as USB storage device) or your computer is switched on and that the device is not in standby mode. • If using a wired network, check that the Ethernet cable is properly attached to the Media Player and to a network router. Check that the router is switched on. • Check that the Media server (your computer) used has shared the Media Player as a client and that the files are also shared. • If you are using static IP addresses, check that the IP address is in the same range as other addresses on your network. Verify that the address is not already used by another PC or device. • Ensure that the files you are sharing use a supported file format. Certain files cannot be played on the Media Player. The Media Player may not support the video or audio format used in the file. For information on what media formats the Media Player supports, refer to Specifications summary in Chapter 1. Only one video/music/photo is played when I selected it. How do I play the entire list? When selecting a video/music/photo to play, pressing the OK button on the remote control plays just the selected file while pressing the PLAY/PAUSE button plays the entire list of files. The LEDs on the Ethernet port do not blink and my wired connection does not work. • Ensure that the LAN Cable plug is firmly connected to the Ethernet port of the Media Player’s rear panel. • Try to replace a functional LAN cable. • Try to reconnect the LAN cable to the Media Player to keep the network connection active. ASUS O!Play HD media player 4-3 Audio There is no sound. • Ensure the volume on the entertainment unit is not on mute mode. • Navigate to the Setup > System screen and ensure that the correct Digital output setting is enabled. If you are using the multiple audio Amplifier, the RAW setting should be enabled. • If you are watching a video th...