Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Support for CMC series controllers The MOTIF XF can now be connected to the Steinberg CMC-PD or CMC-FD, letting you record rhythm patterns to the MOTIF XF by playing the CMC-PD or edit the Mixing parameters from the CMC-FD. • Connection of CMC-PD or CMC-FD to MOTIF XF Plug the USB cable supplied with the CMC-PD or CMC-FD into the USB TO DEVICE terminal of the MOTIF XF and the USB TO HOST terminal of the CMC-PD or CMC-FD. NOTE The CMC-PD or CMC-FD is bus-powered by the MOTIF XF through the USB cable. • Playing the MOTIF XF from the CMC-PD After connecting the CMC-PD to the MOTIF XF, you can play the MOTIF XF from the CMC-PD simply by hitting the Pads. Hitting the Pads transmits MIDI note numbers with velocity data to the MOTIF XF, then sounds the Voice currently selected on the MOTIF XF. NOTE • Pressing the MOTIF XF keyboard lights the LED of the CMCPD Pad to which the corresponding MIDI note number is assigned. (Note that the LED lamp does not light when Local Switch is set to off or Internal Switch of the selected track is set to off.) • You can use a computer to assign MIDI note numbers and velocity data to the Pads by using the editor bundled with the CMC-PD. • You can also change the Pad Bank, Velocity curve and Velocity mode. For details about the operation of the CMCPD, refer to the CMC-PD Owner’s Manual. • Controlling Mixing parameters from CMC-FD You can control the Mixing parameters of the Song/Pattern mode from the CMC-FD. 1 Connect the CMC-FD to the MOTIF XF. 2 Select the desired parameter for control. Open the UTILITY Controller Assign display by pressing [UTILITY], [F5] Control, then [SF3] Control. At the CMC-Fader column, specify the target parameter of the CMC-Fader from these parameters: Volume, Pan, Reverb Send, Chorus Send, Dry Level, Assignable Knob 1 Value, Assignable Knob 2 Value, Cutoff Frequency, Resonance, AEG Attack Time, AEG Decay Time, AEG Sustain Level, AEG Release Time, FEG Attack Time, FEG Decay Time, FEG Sustain Level, FEG Release Time, FEG Depth, Portamento Time NOTE The target parameter can be changed from the CMC-FD by pressing [SHIFT]+[BANK E] or [SHIFT]+[BANK F]. 3 Enter the Song/Pattern mode. Now you can control the MOTIF XF Mixing parameters via the CMC-FD. • Operations which can be controlled from the CMC-FD [CHANNEL E] or [CHANNEL F] Moves the current Part on the Mixing Play display leftward or rightward. [BANK E] or [BANK F] Changes the target Parts of the CMC-FD’s four faders by four Parts. Fader 1 Edits the specified parameter for Part 1, 5, 9, or 13. [SHIFT]+Fader 1 top Switches mute on/off for Part 1, 5, 9, or 13. [SHIFT]+Fader 1 bottom Switches solo on/off for Part 1, 5, 9, or 13. Fader 2 Edits the specified parameter for Part 2, 6, 10, or 14. [SHIFT]+Fader 2 top Switches mute on/off for Part 2, 6, 10, or 14. [SHIFT]+Fader 2 bottom Switches solo on/off for Part 2, 6, 10, or 14. Fader 3 Edits the specified parameter for Part 3, 7, 11, or 15. [SHIFT]+Fader 3 top Switches mute on/off for Part 3, 7, 11, or 15. [SHIFT]+Fader 3 bottom Switches solo on/off for Part 3, 7, 11, or 15. Fader 4 Edits the specified parameter for Part 4, 8, 12, or 16. [SHIFT]+Fader 4 top Switches mute on/off for Part 4, 8, 12, or 16. [SHIFT]+Fader 4 bottom Switches solo on/off for Part 4, 8, 12, or 16. [SHIFT]+[CHANNEL F] Switches between the fader function and the level meter function. When the level meter function is active, input velocity to each part is indicated at the corresponded CMC-FD faders. [SHIFT]+[BANK E] or [SHIFT]+[BANK F] Select one before or the next CMC-FD Fader parameter in the UTILITY Controller Assign display. 2.New Functions in MOTIF XF Version 1.40 Automatic Mounting of the Network Drive Automatic Mounting of the Network Drive • Turning Auto Remount on/off Open the Network Drive Setup display by pressing [UTILITY], [F1] General, then [SF4] AutoLoad. In this display, set Auto Remount to on or off, then store the Utility setting. After setting Auto Remount to on, mount the network drive, turn the power off, then turn the power on again. MOTIF XF automatically remounts the network drive. NOTE • If the last mounted network drive cannot be found, MOTIF XF will not mount the network drive automatically, even though Auto Remount is set to on. • If the instrument was turned off without mounting any network drive, the MOTIF XF will not mount the network drive automatically, even though Auto Remount is set to on. New function of the [PERFORMANCE CONTROL] button in the Master mode When the Mode is set to “Song” or “Pattern” and Zone Switch is set to “on” in the Master Play mode, the [PERFORMANCE CONTROL] button works as follows: • [1] – [8] buttons Each of these will turn the Internal Switches of Zone 1 – 8 on/off. • [9] – [16] buttons Each of these will turn the External Switches of Zone 1 – 8 on/off. NOTE The on/off status of the Internal Switch/External Switch can be confirmed via the corresponding lamp. New Functions in MOTIF XF Version 1.40.3 New Functions in MOTIF XF Version...
Otros modelos de este manual:Sintetizadores / piano - MOTIF XF7 (4.02 mb)
Sintetizadores / piano - MOTIF XF8 (4.02 mb)