Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
By using MIDI cables and a Yamaha i-MX1, connect the instrument to an iPad. The MOTIF XF can be connected via wireless Network MIDI. For details about wireless MIDI connectivity, refer to the “New Functions in MOTIF XF Version 1.20” Manual. NOTE • Before editing, enter the Voice mode. • After editing, store the edited Voice. The instructions in this manual use the MOTIF XF as an example. Depending on your particular musical instrument, there may not be equivalent displays or buttons. Title bar and Utility window Title bar and Utility window Utility window Sets the MIDI Transmit Channel. Selects the MIDI port of the instrument in case of wireless connection. Selects the connected instrument. Assigns the MIDI Control Change numbers to each controller. Determines the Fader behavior. jump: The Fader jumps to any tapped location in the Fader area. catch: The Fader will be “caught” as you drag on it. When set to on, tapping [RECEIVE] calls up a confirmation message. *What is a Template? Each of the Templates includes the settings of all the displays, meaning that you can call up all the Effect settings just by selecting the desired Template. Each of the Templates can be renamed, called up and initialized. Each lamp flashes according to the MIDI in/out messages. Tapping this opens or closes the Utility window. Set this to the same number as that of the instrument. Determines the connection method between the iPad and MIDI instrument. cable: Should be selected when connected via the i-MX1. wireless: Should be selected when connected via wireless Network MIDI. NOTE When set to “wireless,” make the Wi-Fi setup in Settings > Wi-Fi in your iPad. Determines the knob behavior. rotary: Dragging around the knob will rotate it in the same direction. linear: Dragging vertically upward from the knob rotates the knob clockwise, and dragging downward rotates counter-clockwise. When set to on, selecting a Template* transmits the corresponding settings via MIDI. Tapping this calls up the Owner’s Manual. Tapping here initializes all the settings. Voice Editor Essential Owner’s Manual Common display area Common display area 83412765 1 Tapping [RECEIVE] starts reception of the settings from the instrument. Tapping [TRANSMIT] starts transmission of the current settings to the instrument. 2 Changes the Arpeggio type of the current Part. This is equivalent to the [SF1] – [SF5] buttons. 3 To edit the Normal Voice, tap [VOICE]. To edit the Drum Voice, tap [DRUM]. 4 Calls up the Voice list. Tapping the desired voice in the list executes Program Change. 5 Tapping here alternately calls up the XY CONTROL display, ARP/KBD CONTROL display, FADER CONTROL display, EFFECT display and EQ display. 6 Adjust the volume by operating the knob, or by tapping the volume value to call up the slider for adjusting the volume. 7 Indicates the Arpeggio tempo. To change the tempo, tap the Tempo value to call up the slider then operate the slider, or tap [TAP] three times at the desired tempo. 8 Tem...
Otros modelos de este manual:Sintetizadores / piano - MOTIF XF7 (4.7 mb)
Sintetizadores / piano - MOTIF XF8 (4.7 mb)
Sintetizadores / piano - MOTIF XS6 (4.7 mb)
Sintetizadores / piano - MOTIF XS7 (4.7 mb)