Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
• When the click sound continues, check the following parameter setting. Set this parameter to something other than “all” because this setting always plays back the click sound regardless of the sequencer status. [SONG]/[PATTERN] . [UTILITY] . [F2] SEQ . [SF1] CLICK . “Mode” Distorted sound. • Are the effect settings appropriate? Use of an effect at certain settings may produce distortion. [VOICE] . [F6] EFFECT [PERFORM] . [F6] EFFECT [SONG]/[PATTERN] . [MIXING] . [F6] EFFECT MOX6/MOX8 Owner’s Manual 63 Appendix • Are the filter settings appropriate? Excessively high filter resonance settings can cause distortion. [VOICE] . [EDIT] . Element/Key selection . [F3] FILTER [PERFORM] . [EDIT] . Part selection . [F4] TONE . [SF1] FILTER [SONG]/[PATTERN] . [MIXING] . [EDIT] . Part selection . [F4] TONE . [SF1] FILTER [SONG]/[PATTERN] . [UTILITY] . [F2] SEQ . [SF2] FILTER • Are any of the following volume parameters set so high that clipping is occurring? [UTILITY] . [F1] GENERAL . [SF1] TG . “Volume” [VOICE] . [EDIT] . [COMMON] . [F2] OUTPUT . Volume [VOICE] . [EDIT] . Element/Key selection . [F4] AMP . [SF1] LVL/PAN . “Level” [PERFORM] . [EDIT] . [COMMON] . [F2] OUT/MFX . [SF1] OUT . “Volume” [PERFORM] . [EDIT] . Part selection . [F2] OUTPUT . [SF1] VOL/PAN . “Volume” [SONG]/[PATTERN] . [MIXING] . [EDIT] . Part selection . [F2] OUTPUT . [SF1] VOL/PAN . “Volume” Sound is cut off. • Is the entire amount of notes played (via your keyboard playback and Song/Pattern/Arpeggio playback) exceeding the maximum polyphony of this instrument? Only one note sounds at a time. • When this situation occurs, the Mono/Poly parameter in the current mode is set to “mono.” If you wish to play chords, set this parameter to “poly.” [VOICE] . [F4] PORTA . “Mono/Poly” [PERFORM] . [EDIT] . Part selection . [F1] VOICE . [SF2] MODE . “Mono/Poly” [SONG]/[PATTERN] . [MIXING] . [EDIT] . Part selection . [F1] VOICE . [SF2] MODE . “Mono/Poly” Pitch or intervals are wrong. • Is the Master Tune parameter in the Utility mode set to a value other than “0”? [UTILITY] . [F1] GENERAL . [SF1] TG . “Tune” • Is the Note Shift parameter in the Utility mode set to a value other than “0”? [UTILITY] . [F1] GENERAL . [SF1] TG . “NoteShift” • When the Voice produces a wrong pitch, is the appropriate tuning system selected from Micro Tuning parameter in the Voice Edit mode? [VOICE] . [EDIT] . [COMMON] . [F1] GENERAL . [SF2] PLY MODE . “M. Tuning No.” • When the Voice produces a wrong pitch, is the LFO Pitch Modulation Depth in the Voice Edit mode set too high? [VOICE] . [EDIT] . Element/Key selection . [F5] LFO . “PMod” • When the Performance/Song/Pattern produces a wrong pitch, are the Note Shift and Detune parameters of each Part set to a value other than “0”? [PERFORM] . [EDIT] . Part selection . [F4] TONE . [SF1] TUNE [SONG]/[PATTERN] . [MIXING] . [EDIT] . Part selection . [F4] TONE . [SF1] TUNE • When the Song/Pattern playback produces a wrong pitch, is the Note Offset parameter in the Groove display set to a value other than “0”? [SONG]/[PATTERN] . [F2] GROOVE . “NOTE OFST” No effect is applied. • Check the on/off status of the EFFECT [INSERTION]/[SYSTEM]/[MASTER] button. • Is the Reverb Send or Chorus Send set to a value other than “0”? [VOICE] . [EDIT] . [COMMON] . [F2] OUTPUT . “ChoSend” / “RevSend” [PERFORM] . [EDIT] . [COMMON] . [F2] OUT/MFX . [SF1] OUT . “ChoSend” / “RevSend” [SONG]/[PATTERN] . [MIXING] . [EDIT] . Part selection . [F2] OUTPUT . [SF1] VOL/PAN . “ChoSend” / “RevSend” • Have any or all of the Elements’ Insertion Effect Output parameters been set to “thru” in the effect setting display in the Voice Edit mode? [VOICE] . [F6] EFFECT . [SF1] CONNECT . “EL: OUT 1-8” 64 MOX6/MOX8 Owner’s Manual Appendix • Have any or all of the effect types been set to “thru” or “off ”? • When this occurs in the Performance mode/Song mode/Pattern mode, check whether the Insertion Switch (INS SW) parameters are set properly or not. [PERFORM] . [F6] EFFECT . [SF2] INS SW [SONG]/[PATTERN] . [MIXING] . [F3] EFFECT . [SF2] INS SW The Edit Indicator appears, even when parameters are not being edited. • Keep in mind that even though the Edit mode is not active, simply moving a Knob/Slider or playing back the Song/Pattern changes the current Voice, Performance, or Mixing, causing the Edit Indicator to appear. Cannot start the Arpeggio. • Check whether the ARP [ON/OFF] button is turned on or off. • When a User Arpeggio type is selected, does the currently selected Arpeggio actually contain data? • Are the Arpeggio related parameters such as Note Limit and Velocity Limit set appropriately? [VOICE] . ARP [EDIT] . [F4] LIMIT [PERFORM] . ARP [EDIT] . [F4] LIMIT [SONG]/[PATTERN] . ARP [EDIT] . [F4] LIMIT • When this situation occurs in the Performance/Song/Pattern mode, check the Arpeggio Switch parameter. If this parameter for the current Part is set to off, Arpeggio playback will not be triggered by your keyboard performance even if the ARP [ON/OFF] button is turned on. [...
Otros modelos de este manual:Sintetizadores / piano - MOX8 (10.94 mb)