Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
On the S90 XS/S70 XS instrument, these parameters are the same as those called up by selecting “Controller” on the Utility Select display. S90 XS/S70 XS Editor Owner’s Manual 29 S90 XS/S70 XS Editor Window: Detailed Parameter section (when the Voice/Multi is set to “Multi”) S90 XS/S70 XS Editor Window: Detailed Parameter section (when the Voice/Multi is set to “Multi”) Clicking this in the Parameter Category section calls up the Micro Tuning parameters in the Detailed Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up by selecting “Micro Tune” on the Utility Select display. Multi Common This Parameter category, called up by selecting the “G” row in the Mixer section, consists of the following sub categories. Effect Clicking this in the Parameter Category section calls up the Effect-related parameters in the Detailed Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up by selecting “Effect” on the Multi Common Edit Select display then selecting “Reverb” and “Chorus.” Master FX/EQ (Master Effect/EQ) Clicking this in the Parameter Category section calls up the parameters related to the Master Effect and EQ in the Detailed Parameter section. On the S90 XS/S70 XS instrument, the Master Effect parameters are the same as those called up by selecting “Effect” on the Multi Common Edit Select display then selecting “Master,” while the Master EQ parameters are the same as those called up by selecting “Master EQ” on the Multi Common Edit Select display. Multi Name Clicking this in the Parameter Category section calls up the box which lets you edit the Multi name in the Detailed Parameter section. On the S90 XS/S70 XS instrument, this is the same as the display called up by selecting “Name” on the Multi Common Edit Select display. Part Common This Parameter category which is called up by selecting any of the “1” – “16” rows in the Mixer section consists of the following sub categories. General Clicking this calls up the GENERAL window in the Parameter Category section. This window lets you edit the Voice Common parameters such as naming and the Mixing Part parameters such as Pitch, Portamento, Note/Velocity Limit and Part EQ. In the Part Common General section, both the Mixing Part parameters (the “M” indicator appears at the top right during editing) and Voice Common parameters (the “V” indicator appears at the top right during editing) can be edited. To distinguish between them, a small dot is shown at the immediate left of the parameters. ARP (Arpeggio) Clicking this in the Parameter Category section calls up the parameters related to the Arpeggio assigned to the current Part in the Detailed Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up by selecting “Arpeggio” on the Multi Common Edit Select display or Multi Edit Select display. Clicking the row of the Bank/Category/Sub/Number/Name will call up the ARP LIBRARY window which lets you use the search function for the selecting Types, as with the VOICE LIBRARY window (page 14). RCV/Control Set (Receive/Control Set) Clicking this calls up the RCV/Control Set window in the Parameter Category section. This window lets you edit the Receive Switch parameters for the current Part and the Controller Set Assign parameters for the current Part and the Voice. On the S90 XS/S70 XS instrument, these parameters are the same as those called up by selecting “RcvSw” on the Multi Edit Select display. LFO (Low Frequency Oscillator) Clicking this in the Parameter Category section calls up the LFO-related parameters of the Voice assigned to the current Part in the Detailed Parameter section. This Parameter Category is not available if the Drum Voice is assigned to the current Part. S90 XS/S70 XS Editor Owner’s Manual 30 S90 XS/S70 XS Editor Window: Detailed Parameter section (when the Voice/Multi is set to “Multi”) S90 XS/S70 XS Editor Window: Detailed Parameter section (when the Voice/Multi is set to “Multi”) Clicking this in the Parameter Category section calls up the parameters related to the Insertion Effect for the current Part and System Effect applied to all the Parts in the Detailed Parameter section. Element or Drum Key This Parameter Category is called up by selecting any of the “1” – “16” rows in the Mixer section. The “Element” indication appears when the Normal Voice is assigned to the current Part while the “Drum Key” is shown when the Drum Voice is assigned. The parameters belonging to this category lets you make the settings applied to each of the Elements or Drum Keys individually. For details, see the Voice mode section. AD This Parameter Category is called up by selecting the “AD” row in the Mixer section. The parameters belonging to this category lets you make the settings applied to the A/D Part in the Multi mode. The following sub category is included. Effect Clicking this in the Parameter Category section calls up the ...
Otros modelos de este manual:Sintetizadores / piano - S90 XS (1.14 mb)