Votos - 4, Puntuación media: 3.5
(
)
)
|
Resumen del manual
Install the downward pressure lock plate (E) OR place the lift link (D) in snowthrower position. 4. Install the lift lever extension (C). 5. Install the lift rod and attachment (Figure 10). Figure 11. Normal Installation & Removal B C D E F A. Hitch Rod B. Hitch Rod C. Lift Lever Extension D. Lift Link (Manual) E. Pressure Lock Plate (Hydraulic) F. Hook Snowthrower Position A 8 Sub-Frame Hitch Installation Instructions A F C D G A B C D E Snowthrower & Dozer Applications Mower Applications A B C D F E A B F G E Snowthrower & Dozer Applications Mower Applications Figure 12. Lift Lock Plate - Hydraulic Lift Models A. Lift Cylinder B. Flat Head Pin (Original) C. Flat Head Pin (New) D. Lock Plate E. Hair Pin Clips F. Lift Shaft Assy. G. Washers LIFT VARIATIONS WHEN USING ATTACHMENTS When a front-mounted attachment such as a snowthrower or dozer blade is used with the tractor, the lift mechanism must be locked to provide downward force. When the mower is reinstalled the downward pressure lock must be released so that the mower can float. Hydraulic Lift Models When using a snowthrower or dozer, the downward pressure lock plate (D, Figure 12) and an additional pin (C) is installed. These parts are included with the attachment. Note that the washers (G) are not used with the lock plate. When mowing, the downward pressure lock plate (D) is removed and replaced with two washers (G). The additional pin (C) is also removed. Fully lower the hydraulic lift. The lift assembly is spring loaded so it will need to be held in the down position to perform of the following procedures. Figure 13. Lift Link - Manual Lift Models A. Pin B. Rear Hole of Lift Bar (Snowthrower Applications) C. Spacer D. Hair Pin Clip E. Upper Hole (Snowthrower Applications) F. Slot of Lift Link (Mower Applications) G. Lower Hole (Mower Applications) Manual Lift Models NOTE: These instructions apply to Conquest / 1700 / 2700 Series tractors or Broadmoor / 1600 / 2600 Series tractors equipped with a lift lever kit. The lift link is installed differently depending on what attachment is being used. Refer to Figure 13 for link installation information. 9 Installation Instructions Sub-Frame Hitch NOTES MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA Form No. 1733911-04 Rev. 01/2007 © 2007 Briggs & Stratton, Inc. All Rights Reserved TP 200-4417-04-AT-SMAN ...
Otros modelos de este manual:Quitanieves - 1600 (719.25 kb)
Quitanieves - 1700 (719.25 kb)
Quitanieves - 1800 (719.25 kb)