Votos - 1, Puntuación media: 3
(
)
)
|
Resumen del manual
17. ZOOM - BLUE Enlarges the picture. 18. SUBTITLE - YELLOW Display the subtitle language list where available. 19. V-/V+ Adjusts the audio volume. 20. MUTE Pauses the audio temporarily. That is, volumes on/off temporarily. 21. UHF Displays the UHF menu. 22. ? (HELP) Displays the Help box on the screen. The help box shows the information of the current service. * * COLOUR BUTTONS (R/G/B/Y/W) Select color keys for interactive applications. GB 11 This chapter describes how to set up the product. Select the most appropriate procedure depending on your case. Before you connect the product to any other equipment, you must disconnect all the equipment from their power sources. Note: If you encounter any problem when setting up the product, please contact your local product distributor. 2.1 Connecting Antenna/TV 1. Connect an Antenna to LNB IN on the product. 2. Connect VIDEO on the product to VIDEO IN on the TV using the RCA cable. 3. Connect AUDIO L/ R on the product to AUDIO IN L/ R on the TV using the RCA cable. GB 12 2.2 Connecting Hi-Fi System 1. Connect an Antenna to LNB IN on the product. 2. Connect VIDEO on the product to VIDEO IN on the TV using the RCA cable. 3. Connect AUDIO L/ R on the product to AUDIO IN L/ R on the Audio System using the RCA cable. GB 13 2.3 Powering On 1. Connect the power cord of the product to a wall outlet. 2. Press the STANDBY button on the front of the product or on the remote controller. GB 14 3.1 Selecting Language When powering on your product for the first time after purchasing, the Selecting Language screen is automatically displayed. Select your desired language using the button and press the OK button. The following procedure is HUMAX Auto Search. For information about it, refer to 3.2 Searching Services. 3.2 Searching Services To search services, go to Service Searching menu (MENU-INSTALLATION-SERVICE SEARCHING) . Menu structure varies according to an item and its operation. You can easily navigate the menu using the following instructions: 1. Press the MENU button to display the main menu screen. 2. Select your desired item using the button. 3. Press the OK button to move from the menu to the sub-menu. 4. Press the button to select option values. 5. Press the NUMERICAL button to enter the option values. 6. Press the button to open the option list and press the EXIT button to close the option list. 7. Press the EXIT button to return to the parent-menu. 8. Press the MENU button to exit the menu screen. Note: • The searching services may differ depending on the type of the receiver. • Some menu items are access controlled. When accessing to the protected menu, you will be prompted to enter the Pin Code. Enter your Pin Code using the NUMERICAL button. The default Pin Code is set to “1234” . GB 15 1. HUMAXAutoSearch If your product is connected to the antenna and television, you can automatically search services without entering any other information. Warning: Please note that once you perform HUMAX Auto Search, all data such as Antenna setting information channel lists and smart card information you already set are deleted. When you select this menu, you can view the window asking if you have a motorized dish. If you wish to stop the operation, press the EXIT button. If you do not have a motorized dish, select No, and press the OK button. Then, the product will search services. Wait a moment until the operation is completed. After completing search operation, the result window will be displayed. If no satellite is detected, you can select Continue or Retry. If you select Retry, the product will search services again. If you select Continue, you can return to the Service Searching menu. If you have a motorized dish, select Yes, and press the OK button. The Antenna Setting menu will be displayed. The configuration of antenna is described in the following. Note: This menu may vary according to the type of the receiver. GB 16 2. AntennaSetting2. AntennaSetting You can set antenna and LNB information to search services. • Antenna Alternative: Select antenna alternative which has different combinations of settings for search. Antenna Alternative 16 is predefined for SMATV. • Satellite Name: Displays the satellite list ordered by name. If the desired satellite name is not listed, then select User Defined. You can enter the Satellite Name using the keyboard displayed on the screen. • LNB Frequency: Select the L. O (Local Oscillator) Frequency of the LNB. • 22KHz Tone: When using the 22HKz tone switch, select Enabled. Otherwise, select Disabled. • DiSEqC Input: If you are using DiSEqC (Digital Satellite Equipment Control) switch to connect multiple antennas or LNBs, select DiSEqC input to connect to antenna or LNB. • Motorised System: When using motorised system, select Enabled. Otherwise, select Disabled. When Motorised System is set to Enabled, DiSEqC Input is disabled. • LNB Voltage: You can select Standard voltage or High voltage. • LNB Power: You can turn LNB Power on or off....