Votos - 5, Puntuación media: 3.6 ( )

Fabricar: Hotpoint Tamaño del archivo: 413.31 kb Nombre del archivo: Idioma del manual:

Use less soap if you have soft water, a smaller load, or a lightly soiled load. Water temperature is incorrect Control is not set properly • Check water temperature control and adjust. Water supply is turned off or improperly connected • Turn both hot and cold faucets fully on and make sure hoses are connected to correct faucets. Water valve screens are stopped up • Turn off the water source and remove the water connection hoses from the upper back of the washer. Use a brush or toothpick to clean the screens in the machine. Reconnect the hoses and turn the water back on. House water heater is not set properly • Make sure house water heater is delivering water at 120°F.–140°F.(48°C.–60°C.). Water won’t drain Drain hose is kinked or improperly connected • Straighten drain hose and make sure washer is not sitting on it. • Top of drain outlet should be less than 8 ft. above floor. 12 OPERATION Possible Causes What To Do Washer pauses in cycle The washer normally pauses between washing steps Washer won’t operate Washer is unplugged • Make sure cord is plugged securely into a working outlet. Water supply is turned off • Turn both hot and cold faucets fully on. Controls are not set • Check controls and make sure Cycle knob is pulled out properly to ON position. Lid is open • Close lid and pull Cycle knob out to ON position. Circuit breaker/fuse is • Check house circuit breakers/fuses. Replace fuses or tripped/blown reset breaker. Washer should have separate outlet. PERFORMANCE Possible Causes What To Do Clothes too wet Incorrect spin cycle selected • Make sure the spin cycle selected matches the load you are washing. Some fabrics will feel wetter when rinsed with cold water. Colored spots Incorrect use of fabric softener • Check fabric softener package for instructions and follow directions for using dispenser. • Pretreat stain and rewash. Dye transfer • Sort whites or lightly colored items from dark colors. Grayed or yellowed clothes Not enough detergent Hard water • Use more detergent (especially with larger loads). • Use a water conditioner like Calgon brand or install a water softener. Water is not hot enough • Make sure water heater is delivering water at 120°F.–140°F. (48°C.–60°C.). Washer is overloaded • Select load size to match clothes load. Detergent is not dissolving • Add detergent as wash basket fills with water before you load clothes. Dye transfer • Sort clothes by color. If fabric label states wash separately, unstable dyes may be indicated. Lint or residue on clothes Clothes are air or line dried • If you do not dry your clothes with a clothes dryer, your clothes may retain more lint. Incorrect sorting • Separate lint producers from lint collectors. Washing too long • Wash small loads for a shorter time than larger loads. Detergent not dissolving • Add detergent as wash basket fills with water, before you load clothes. • Try a liquid detergent. • Use warmer water temperature. Overloading • Load clothes no higher than the top row of hole...

Descargar ahora

Introduzca dos números de la imagen: