Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
Customized The drying program defined by user himself and stored. Normal Normal drying Heavy Big clothes drying like jeans Cotton Special drying for cotton clothes Delicate Drying small quantity clothes Permanent Press Drying underwear or clothes requiring smoothness Bulky Items Drying bulky clothing Temp Button: (8) Used to set drying temperature. There are 4 available drying temperatures: High, Medium, Low, and Air only(no heat). Sensor Dryness Level Button: (9) Used to set drying time of auto-programs. If no auto-program is selected, pressing the button is inactive and will get alarms. Status lights: (10) Status lights give notification of which part of the cycle the machine is in. Nixie display: (12) Indicate remaining time (min) during cycle operation. Indicate remaining reserved time (hr) during reservation. Note: if door opened during cycle running, displays "E2" and alarms. English Function Light Indicator: The function "display light" indicates selected feature is "ON" or the cycle is about to begin. During the dry cycle, "flashing light" indicates current running program. Rapidly flashing light indicates that the dryer is not operating properly. Preparations before drying Group the clothes of the same kind (cotton, chemical fibres, woolen) to dry. Dark and light colored clothes shall be separately dried. Fabrics prone to falling lint and those prone to adhering lint shall be separately dried. Clothes prone to falling lint shall be turned inside out before putting into the dryer. Make sure buttons and ornaments on the clothes are high temperature resistant and won't damage drum surface. Before loading, the clothes shall have their zippers zipped up, buttons and hooks done up and belts tied so as to avoid entanglement or other obstacles. If possible, turn out the clothes pockets for uniform drying. Check if clothes remain soiled. If yes, wash it away again, otherwise the soils after drying may not be removed permanently. Small articles shall be collected in a mesh bag before loading and drying, so as to avoid entanglement and ensure easy to be taken out. Make sure power socket is reliably grounded. The grounding terminal shall not be connected to gas or tap water pipelines. Make sure exhaust duct has been connected with extension pipe. Make sure lint filter is clean and then assemble it properly. If lint filter is not in place, tumbling items could enter the exhaust system and cause damage to the dryer. Notes: It applies to Auto Dry cycle and Timed Dry cycle. For Rack Dry cycle, remove the lint filter and assemble the drying rack with its rear end slightly downward inclined. The assembled status is as shown in the following figure: Drum Drying rack English Load clothes into dryer Auto Dry cycle and Timed Dry cycle The appropriate load shall be 1/3 ~ 1/2 of the drum volume. Avoid too much load, for a certain space is needed to allow clothes free rotation for uniform and wrinkle- proof drying. When drying big articles, only 2-3 pieces shall...
Otros modelos de este manual:Secadoras - RDE200AW (1.1 mb)
Secadoras - CRDE200AW (1.1 mb)
Secadoras - CRDE400AW (1.1 mb)
Secadoras - CRDE200AW (1.1 mb)