Votos - 3, Puntuación media: 4.3 ( )

Fabricar: Amana Tamaño del archivo: 1.1 mb Nombre del archivo: Idioma del manual:

Do not excessively dry clothes to avoid wrinkles, shrinkage, roughness, electrostatic chargesaccumulation and more lint. Rack Dry cycle This program is designed specially for articles like sport shoes. During drying please make sure the clothes reliably stay on the rack with no risk of entangling the agitation blade while drum is rotating. Note: If drying rack is not in place, rolling inner tub could collid with drying rack and causes damage to the dryer and drying rack. Auto Dry cycle 174 62 53 Cycles Dry Cool down Cycle completed Extend tumble Customized On Off Wrinkle Care More Time Less Time Auto Dry Rack dry Timed Dry Time Remaining On/Off Power Pause Start Temp Air Only(No Heat) High Medium Low Normal Heavy Delicate Bulky Items Louder Softer Signal Cycle Off Cycles Timed Cotton Very DAMP LevelDryness More Normal Less Sensor Permanent Press 1. Press "Power On/Off" button to power on Turn on the power switch, the computer board beeps once and the dryer transfers from off status to the initial operating status (Normal program); If no "Start/Pause" button is pressed in 5 min after powering on, it automatically cuts off power and returns to off status; It returns to off status immediately upon end of a cycle; Whatever status the computer board is (start, pause, alarm etc.), Pressing "Power On/Off" button will stop all operations and it enters off status. English Various button initial status for "Normal program" Cycle Signal Softer Wrinkle Care Off Cycles Normal Nixie display Indicate current program remaining time Temp High Sensor Dryness Level More Dry Timed/Cycles Auto-program 2. Press "Cycles" button to select a suitable full automatic cycle The Normal program will be automatically selected after powering on. If other full automatic program is desired, press "Auto-program Selection" button until corresponding indicator turns on. Customized Cycles Normal Heavy Cotton Delicate Bulky Items Permanent Press Initial status of various buttons when setting "Auto-program Selection". Cycles Normal Heavy Cotton Delicate Permanent Press Bulky Items Wrinkle Care To be used together with reserve function, off if reserve is disabled Cycle Signal Softer Delay Start Indicate current selected program remaining time Timed/ Cycles Auto Dry Temp High High Midium Low Air Only(No Heat) High Dryness Level More Dry Notes: If "Customized" is selected, various buttons will indicate previous conditions set by the user. "Customized" function is a program designed to facilitate user's operation. It can memorize programs defined by user himself and display the previous program upon next application of this function. Use details are as follows: After powering on, press "Cycles" until "Customized" status, then set "Cycles" to Timed Dry or Rack Dry, and set status of other buttons. Press "Start/Pause" button or after half a minute, the program defined by user himself will be stored and will be directly displayed upon next use. Notes: Pressing "Sensor Dryness Level" button wi...

Descargar ahora

Introduzca dos números de la imagen: