Votos - 5, Puntuación media: 3.8
(
)
)
|
Resumen del manual
Press the ^ or ▼ button to select “Channel”, then press the ENTER® button. 2. Press the ^ or ▼ button to select “Sort”, then press the ENTER® button. 3. Press the ENTER® button to select “From”. Press the ^ or ▼ button until the channel number that you wish to change is displayed. Press the ENTER® button. 4. Press the ^ or ▼ button to select “To”, then press the ENTER® button. Press the ^ or ▼ button until the new number by which you wish to identify the channel is displayed. Press the ENTER® button. 5. Press the ^ or ▼ button to select “Store”, then press the ENTER® button. Press the ^ or ▼ button to select “OK”, then press the ENTER® button. ^ The selected channel is exchanged with the one previously stored to the chosen number. 6. Repeat steps 3 to 5 for another channel to be sorted. 7. Press the EXIT button to exit. \ Add/Delate \ P1 Not In Memory Add I SCtianga_B1 Enter_HjRatum | English-9 Assigning Channels Names Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. 1. Press the MENU button to display the menu. Press the ^ or ▼ button to select “Channel”, then press the ENTER® button. 2. Press the ^ or ▼ button to select “Name”, then press the ENTER® button. 3. If necessary, select the channel to be assigned to a new name by pressing the ^ or ▼ button. Press the ENTER® button. To... Then... Select a letter, number or symbol Press the ^ or ▼ button Move on the next letter Press the ► button Move back the previous letter Press the 4 button Confirm the name Press the ENTER® button >• The characters available are : Letters of the alphabet (A~Z) Numbers (0~9) Special characters ( -, space) 5. Repeat steps 3 to 4 for each channel to be assigned to a new name. 6. Press the EXIT button to exit. Fine Tuning Channel Reception Use fine tuning to manually adjust a particular channel for optimal reception. 1. Use the number buttons to directly select the channel that you want to fine tune. 2. Press the MENU button to display the menu. Press the ^ or ▼ button to select “Channel”, then press the ENTER® button. 3. Press the ^ or ▼ button to select “Fine Tune”, then press the ENTER® button. 4. Press the 4 or ► button to adjust the fine tuning. Press the ENTER® button. 5. Press the EXIT button to exit. ^ Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner. And the channel number turns red. ^ To reset the fine-tuning, select “Reset” by pressing the ^ or ▼ button and then press the ENTER ® button. English-10 SETTING THE PICTURE Changing the Picture Standard J You can also press the P.MODE button on the remote control to select one of the picture settings. You can select the type of picture which best corresponds to your viewing requirements. Press the MENU button to display the menu. Press the select “Picture”, then press the ENTER® button. Press the ENTER® button to select “Mode”. Press the ^ or ▼ button to select the desired picture effect. Press the ENTER® button. Press the EXIT button to exit. Dynamic: Selects the picture for high-definition in a bright room. Standard: Selects the picture for optimum display in a normal environment. Movie: Selects the picture for comfortable display in a dark room. Custom: Select to view your favorite display settings. (Refer to “Adjusting the Custom Picture” on page 11) “ The Picture mode must be adjusted separately for each input source. or ▼ button to Adjusting the Custom Picture Custom Tint SO G * iti R so ▼ Move 0 Enter m Return Your set has several settings which allow you to control picture quality. 1. Press the MENU button to display the menu. Press the ^ or ▼ button to select “Picture”, then press the ENTER® button. 2. Press the ^ or ▼ button to select “Custom”, then press the ENTER® button. 3. Press the ^ or ▼ button to select a particular item. Press the ENTER® button. 4. Press the 4 or ► button to decrease or increase the value of a particular item. Press the ENTER® button. 5. Press the EXIT button to exit. ♦ Contrast: Adjusts the lightness and darkness between objects and the background. ♦ Brightness: Adjusts the brightness of the whole screen. ♦ Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull. ♦ Colour: Adjusts the colours, making them lighter or darker. ♦ Tint (NTSC only): Adjusts the colour of objects, making them more red or green for a more natural look. ^ If you make any changes to these settings, the picture mode is automatically switched to “Custom”. English-11 Changing the Colour Tone You can select the most comfortable colour tone to your eyes. 1. Press the MENU button to display the menu. Press the ^ or ▼ button to select “Picture”, then press the ENTER® button. 2. Press the ^ or ▼ button to select “Colour Tone”, then press the ENTER® button. 3. Press the ^ or ...
Otros modelos de este manual:TV - LE15S51BP (9.45 mb)