Votos - 1, Puntuación media: 4 ( )

Fabricar: Samsung Tamaño del archivo: 19.47 mb Nombre del archivo: Idioma del manual:

Traces of borders displayed on the left, right and centre of the screen may cause image retention(screen burn) which are not covered by the warranty. Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted. ^ NOTE • After selecting Screen Fit in HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) mode, you may need to center the picture: 1. Press the ◄ or ► button to select Position. 2. Press the ENTERS button. 3. Press the ▲, ▼, ◄ or ► button to move the picture. • Depending on the input source, the picture size options may vary. • The available items may differ depending on the selected mode. • In PC mode, only 16:9 and 4:3 modes can be adjusted. • Settings can be adjusted and stored for each external device connected to an input of the TV, • If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan function. ■ Screen Mode (16:9 / Wide Zoom / Zoom / 4:3): Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size. ^ Not available in PC, Component or HDMI mode. ■ Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualisation): When the broad cast signal is weak, some static and ghosting may appear. Select one of the options until the best picture is displayed. Auto Visualisation: When changing analogue channels, displays signal strength. ^ Only available for analogue channels. ^ When bar is green, you are receiving the best possible signal. ■ MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide an improved picture quality. ^ Disabled under PC mode. ■ HDMI Black Level (Normal / Low): Selects the black level on the screen to adjust the screen depth. ^ Available only in HDMI mode (RGB signals). ■ Film Mode (Off / Auto1 / Auto2): Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality, ^ Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i). ■ Auto Protection Time (2 hours / 4 hours / 8 hours / 10 hours / Off) : If the same image remains on the screen, Auto Screen Burn Protector will work. Picture Reset (OK / Cancel) Resets your current picture mode to its default settings. Setting up the TV with Your PC Set the input source to PC. Auto Adjustment tfrMt Adjust frequency values/positions and fine tune the settings automatically. ^ Not available when connecting through HDMI/DVI cable. English 15 03 Basic Features Basic Features Screen Adjusting sound settings ■ Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned to the centre of screen. ■ Position: Adjust the PC screen position with direction button (▲ / ▼ / ◄ / ►). ■ Image Reset: Resets the image to default settings. Using Your TV as a Computer (PC) Display Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card, the actual screens on your PC may differ in which case the same basic set-up information will almost always be applied. (If not, contact your computer manufacturer or Samsung Dealer.) 1. Click on "Control Panel" on the Windows start menu. 2. Click on "Appearance and Themes" in the "Control Panel" window and a display dialog-box will appear, 3. Click on "Display" and a display dialog box will appear, 4. Navigate to the "Settings" tab on the display dialog-box, • The correct size setting (resolution) [Optimum: 1360 X 768 pixels] • If a vertical-frequency option exists on your display settings dialog box, the correct value is "60" or "60 Hz", Otherwise, just click "OK" and exit the dialog box, Sound Menu Changing the Preset Sound Mode Mode n»wt ■ Standard: Selects the normal sound mode, ■ Music: Emphasizes music over voices, ■ Movie: Provides the best sound for movies. ■ Clear Voice: Emphasizes voices over other sounds, ■ Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired. Equalizer Adjusts the sound mode. ■ Balance L/R: Adjusts the balance between the right and left speaker. ■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies. ■ Reset: Resets the equalizer to its default settings, Sound Systems, Etc. Virtual Surround (Off / On) This function provides a virtual 5.1 channel surround sound experience through a pair of speakers or headphones using HRTF (Head Related Transfer Function) technology. ^ If Speaker Select is set to External Speaker, Virtual Surround is disabled. Dialog Clar...

Descargar ahora

Introduzca dos números de la imagen: