Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
You may prefer to perform Fav channel setup from a menu. See the Setup > Edit options, page 44. ANT-1 4 480i Stretch Fav2 TV-PG Stereo SAP FAV Channel and Fav numbers in the on-screen status display Using Fav Channels See the current Fav bank number Press INFO. 1. Press the FAV key. Wait for the TV to tune to a channel in the current Fav bank. 2. Press the FAV key repeatedly to cycle through the channels available in the current Fav bank. 1. Press the FAV key. Wait for the TV to tune to a channel in the current Fav bank. 2. When tuning is complete and while the TV status display is still visible on screen, press the number key for the desired bank (1–6). Note: Wait for the channel change to finish before pressing the number key. Otherwise, the TV may ignore the Fav number. The FAV key switches to the previously tuned channel; works like the QV key. View channels in current Fav bank Change Fav banks If no Fav banks are set up Fav Setup Using Only the Remote Control Add Fav channels 1. While watching TV, tune to the channel you want to add to the current Fav memory bank. The default bank is Fav1. See the instructions above if you need to change to a different Fav bank. 2. Press and hold the FAV key for about 2 seconds. When Fav and the memory bank number appear under the channel number, the channel has been successfully added. Remove Fav channels This procedure removes the channel only from the selected bank and leaves the other banks unchanged. 1. While watching TV, press the FAV key. 2. While the TV status display is still visible on screen, press the number key for the memory bank. 3. Press the FAV key repeatedly until you see the desired channel in the on- screen status display. 4. While the channel number and Fav indicator (with correct bank number) are still displayed on the screen, press CANCEL. You must press CANCEL while the indicator is displayed. When the Fav indicator disappears after pressing CANCEL, the channel has been successfully removed. 4. TV Operation and Features TV Signals and Display Formats This is a 16:9 widescreen TV suitable for images available from HDTV and many DVDs. You can view older- style squarish images (4:3 aspect ratio) using one of the display formats described on this page. Press the FORMAT key to cycle through the available display formats. The TV remembers the format you last used for each input. DVD Image Definitions Image information may be stated on the DVD case. Some DVDs support both of the formats described below. Anamorphic (or Enhanced for WideScreen TV) Indicates DVDs recorded to show widescreen images properly on 16:9 TV sets using the TV’s Standard format mode (recommended). Non-Anamorphic (or 4:3, 1:33:1, Letter Box, or Full Screen) Indicates DVDs recorded for viewing on squarish TV screens. They may be full screen (4:3 or 1:33:1) which crops movies to fit the narrow TV, or letter box, which adds black top and bottom bars. Signal Definitions 480i: Traditional interlaced signals from ANT-1 and ANT 2, composite VIDEO, component Y Pb Pr, and HDMI jacks. 480p: Progressive-scan DVD signals on component Y Pb Pr and HDMI jacks. 720p and 1080i: High-definition signals received through component Y Pb Pr and HDMI jacks. These signals are always 16:9 (widescreen). SD 4:3: Standard-definition squarish-screen-format signals from digital channels on ANT 1 and ANT 2. SD 16:9: Standard-definition widescreen-format signals from digital channels on ANT 1 and ANT 2. HD 16:9: High-definition 16:9 widescreen signals from digital channels on ANT 1 and ANT 2. TV Display Format Definitions Standard: This is the full-screen format used by HDTV signals. Use this format to display anamorphic DVDs with a 1.78:1 or 1.85:1 aspect ratio. Anamorphic DVDs with a 2.35:1 aspect ratio are displayed correctly but with top and bottom black bars. Narrow (4:3) images are stretched evenly from side to side. Available for all signals. Expand: Enlarges the picture to fill the screen by cropping the top and bottom; useful for reducing the letter box top and bottom bars of non-anamorphic DVD images. Zoom: Enlarges the picture to fill the screen by cropping the sides, top, and bottom to eliminate black bars. 480i/480p and SD 4:3 signals: Eliminates top and bottom bars on anamorphic DVDs with a 2.35:1 aspect ratio. 720p, 1080i, SD 16:9, and HD signals: Eliminates bars added to 4:3 images. Non-anamorphic or SD 4:3 Anamorphic DVD Standard Distorted. Not recommended. Recommended Expand Recommended for letterbox. See Note 1. Distorted; not recommended. See Note 1. Zoom Distorted. Not recommended. See Note 1. Recommended for anamorphic 2.35:1 images. See Note 1. Stretch Recommended for standard broadcasts. See Note 1. Distorted; not recommended. See Note 1. Stretch Plus Recommended for standard broadcasts. See Note 1. Distorted; not recommended. See Note 1. Narrow See Note 1 Distorted; not recommended. See Note 1. Original Signal Display Formats SD 16:9 or HD Digital 720p, 1080i, 1080p Signal Wide Expand Rec...
Otros modelos de este manual:TV - WD-65C8 (3.07 mb)
TV - WD-65C8 (3.07 mb)