Votos - 1, Puntuación media: 3
(
)
)
|
Resumen del manual
If you forget your pass code, you can view the locked TV without entering your pass code. When you are prompted for your pass code, press the number 9 and QV keys on the TV remote control at the same time. This process temporarily unlocks the TV. When entering the Lock menu, this process deletes your old pass code and prompts you to enter a new pass code. • You can either enter a new pass code to open the Lock menu and make changes or press EXIT to close the menu. • If any of the locks are turned on and you exit the menus when prompted for a new code, the old code and all lock settings are retained. • If all locks are turned off and you exit the menus when prompted for a new code, then the previous code is erased. IMPORTANT When changing or deleting your pass code, you must use the remote control included with this TV. You cannot use a Mitsubishi remote control from another component or a “universal” remote. Appendices This page intentionally left blank Appendices Appendix C: Programming the Remote Control This appendix explains programming the TV’s remote control to operate other A/V devices. This is distinct from NetCommand control. The TV’s remote control can operate other devices by three different methods: • Remote Control Programming: You must move the slide switch to the position specific to the type of device. • 736 or 835 Series TV. NetCommand® IR “learning”: You can operate other devices with the slide switch in the TV position. • NetCommand for CEC devices (all TV models): You may be able to operate compatible HDMI devices with the slide switch in the TV position. See the device’s Owner’s Guide and Appendix “E,” page 77. Functions Available for Other A/V Devices The TV’s remote control can be programmed to operate other types and brands of A/V products. To use the remote when programmed, set the slide switch to the position labelled for the product type. The functions performed in each switch position can vary depending on the product. Not all functions work for all models. The most common functions available are listed on this page. Set the remote control’s slide switch to the type of device you wish to program for or control. IMPORTANT Some manufacturers may change their products or they may use more than one remote control system. The TV’s remote control may be unable to operate your A/V equipment in these cases. VCRs and DVRs • CH / • (RECORD) • POWER • (REVERSE) • SLEEP • (STOP) • (FAST FORWARD) • GUIDE (DVR only) • (PAUSE) • MENU (DVR only) • (PLAY) • 0–9 Number Buttons Mitsubishi VCRs are compatible with some additional buttons. Cable Boxes and Satellite Receivers • AUDIO (PAGE UP) • 0–9 Number Buttons • CANCEL (on some (on some models) models) • F1–F4 (A, B, C, D keys • CH / on some models) • ENTER (on some models) • GUIDE (on some models) • LIST • POWER • (on some models) • VIDEO (PAGE DOWN) • QV (ENTER; for channels on some models) The record/playback keys (on some models): • (FAST FORWARD) • (PAUSE) • (PLAY) • (RECORD) • (REVERSE) • (STOP) A/V Receivers • MUTE • Direct Input Selection • POWER buttons: numbers, • SLEEP FAV and QV (on some • VOLUME Mitsubishi models) • 0–9 Number Buttons CD Players (not all functions for all models) • SLEEP • (FAST FORWARD) • (PAUSE) • (PLAY) • (REVERSE) • (STOP) • 0–9 Number Buttons DVD and Laser Disc Players (not all functions for all models) • CANCEL (on some models) • CH / (for track skip on some models) • ENTER • MENU • POWER • SLEEP • (on some models) • (FAST FORWARD) • (PAUSE) • (PLAY) • (RECORD) • (REVERSE) • (STOP) • 0-9 Number Buttons (on some models) Appendices Appendix C: Programming the Remote Control, continued Programming the Remote Control 1. Move the slide switch at the top of the remote to the position for the product you want to control. Refer to the table below. Only one of each device type can be controlled in each slide-switch position. Switch Position Affected Device CABLE/SAT Cable Box DTV Receiver Satellite Receiver VCR VCR DVR Laser Disc Player DVD Player/Recorder DVD DVD Player/Recorder DVR Laser Disc Player VCR AUDIO A/V Receiver Audio Amplifier CD Player 2. Press and hold POWER on the remote control for several seconds until the button blinks twice and goes off. 3. Release the POWER button. 4. Enter the first five-digit code listed for your equipment. • The POWER button blinks twice when you start to enter the code and then once for each additional keypress. • The POWER button blinks twice when you finish entering a valid code. • Move the slide switch to another position if you need to start over or wish to exit programming mode. 5. Point the remote control at the equipment and press POWER. If the product has no power on/off function, press a different key, such as (PLAY), (STOP), VOL , or MUTE. • If the equipment responds, the remote control is properly programmed to operate the equipment. • If the equipment does not respond, repeat steps 2–4 with the next five-digit code listed for your equipment. 6. Once you have found the...
Otros modelos de este manual:TV - WD-65C8 (3.07 mb)
TV - WD-65C8 (3.07 mb)