Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
All adjustments will return to their previous figures. Image Adjust Menu Use the Point 7 8 buttons to adjust the setting value. Move the red frame pointer to the desired item and then press the SELECT button. Image Adjust Menu icon Selected Image mode .Note: •When the White balance Red, Green, or Blue is adjusted, the Color temp. level will change to “Adj.”. Store icon Image Mode Menu Move the red frame pointer to an image item to be set and then press the SELECT button. Store icon Image Mode Menu Move the red frame pointer to an image item to be set and then press the SELECT button. Computer Input Store To store the adjusted data, select Store and press the SELECT button. Use the Point ed buttons to select one from Image 1 to 4 and press the SELECT button. A confirmation box appears and then select [Yes]. Stored data can be called up by selecting an “Image (1–4)” in the This projector has the picture screen resize function, which enables you to customize the image size. Image Mode Selection on page 34. Quit Exit the Image Adjust Menu. Screen Size Adjustment Press the MENU button to display the On-Screen 1 Menu. Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon. Use the Point ed buttons to move the red frame 2 pointer to the desired function and then press the SELECT button. Normal Provide the image to fit the screen size. True Provide the image in its original size. When the original image size is larger than the screen size (1024 x 768), the projector enters to the panning mode automatically. Use the Point ed7 8 buttons to pan the image. When adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear. Wide Provide the image to fit the wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used for providing a squeezed video signal at 16:9. Full screen Provide the full screen image. A confirmation box appears and then select [Yes] Screen Menu Move the red frame pointer to the function and press the SELECT button. Screen Menu icon .Notes: •This Screen Menu cannot be operated when 720p(HDTV), 1035i (HDTV), or 1080i (HDTV) is selected in the PC System Menu (p.30). •This projector cannot display any resolution higher than 1600 x 1200. If your computer’s screen resolution is higher than it, reset the resolution to the lower before connecting to the projector. •The image data in other than 1024 x 768 is modified to fit the screen size in initial mode. •True, Full screen, and Digital zoom +/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.30). Computer Input For zooming in and out the images Digital zoom + Select Digital zoom +. The On-Screen Menu disappears and “D. zoom +” appears. Press the SELECT button to expand the image size. Use the Point ed7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM e button on the remote control. Digital zoom – Select Digital zoom –. The On-Screen Menu disappears and “D. zoom –” appears. Press the SELECT button to compress image size. The projected image can be also compressed by pressing the D.ZOOM d button on the remote control. To exit the Digital zoom +/– mode, press any button except the D.ZOOM ed buttons, SELECT, and Point buttons. To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see pages 28-29) again, or adjust the screen size with the D.ZOOM ed buttons. Remote Control D.ZOOM + button POINT buttons SELECT button D.ZOOM - button .Notes: •The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used (p.33). •Minimum compression ratio can be limited depending on the input signal or when the Keystone function is working. • True, Full screen, and Digital zoom +/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.30). •Digital zoom +/- cannot be selected when Full screen or True is selected. Video Input Input Source Selection (Video, S-video) Direct Operation Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. Menu Operation Press the MENU button to display the On-Screen 1 Menu. Use the Point 7 8 buttons to move the red frame pointer to the Input Menu icon. Use the Point ed buttons to move the red arrow 2 pointer to Video and then press the SELECT button to display the Source Select Menu. Move the pointer to the desired source and then press 3 the SELECT button. When selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the following order: Auto 1. S-video 2. Video When ...
Otros modelos de este manual:TV - LC-XB29N (2.11 mb)