Votos - 4, Puntuación media: 3.5
(
)
)
|
Resumen del manual
The Transmitter (HDM-C5-3X-S) captures the input HDMI/DVI signals and carry the signals through one RJ-45 connector into one cost effective CAT-5/5e/6 LAN cable. The Receiver (HDM-C5-3X-R) equalizes the sent TMDS multimedia data. The transmission distance between the sending and receiving units can be up to 60m (200ft) under HD (720p/1080i) or 40m (130ft) under Full HD (1080p). With an 8-level equalization control knob on the receiving unit, users can adjust the equalization strength to the received TMDS signals accordingly, and therefore optimize the transmission distance between source and destination. - H DMI 1.3a compliant [3D video] - Extend the transmission up to 60m (200ft) from the HDMI source at HD 1080i or 720p 24-bit - Extend the transmission up to 40m (130ft) from the HDMI source at Full HD 1080p 24-bit - Extend the transmission up to 20m (65ft) from the HDMI source at Full HD 1080p 36-bit - HDCP 1.1 compliant - Minimize the cable skew by adjustable 8-level equalization control - Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6 cable transmission - DTS-HD and Dolby True HD high bit rate audio support - Allows cascading - Wall mounting housing design for easy and robust installation - Perfectly integrated with other HDMI over CAT5 series products 1.5 Package Contents Before you start the installation of the converter, please check the package contents. - HDM-C5-3X-S x 1 - HDM-C5-3X-R x 1 - Mini USB to USB Adapter x 2 - User’s Manual x 1 1.6 Before Installation . Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. . Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. . Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. . Do not twist or pull by force ends of the optical cable. It can cause malfunction. 2 1 1.7 Panel Description FRONT PANEL (Transmitter, HDM-C5-3X-S) 1. HDMI Input 2. Mini USB Connector DIP Switch Under Transmitter 0 VIDEO Locks to Full HD 1080p 24-bit AUDIO Supports up to 7.1 Channel Output 1 VIDEO Locks to Full HD 1080p 24-bit AUDIO Locks to Stereo Audio Output 2 VIDEO up to Full HD 1080p 36-bit AUDIO Supports up to 7.1 Channel Output 3 VIDEO up to Full HD 1080p 36-bit AUDIO Locks to Stereo Audio Output 4 VIDEO Locks to HD 720p or 1080i 24-bit AUDIO Supports up to 7.1 Channel Output 5 VIDEO Locks to HD 720p or 1080i 24-bit AUDIO Locks to Stereo Audio Output 6 VIDEO up to 3D Full HD 1080p 36-bit AUDIO Locks to Stereo Audio Output 7 EDID Learning Learns EDID from Display If a flickering or a blinking image is seen, try to adjust the rotational switch to improve the cable skew. 0 stands for the strongest EQ while 7 stands for the weakest. Try adjusting the EQ from 7 to 0 1 2 REAR PANEL (Transmitter, HDM-C5-3X-S) 1. HDMI OUT 2. Mini USB Connector DIP Switch HDM-C5-3X-R (Receiver) Rotary control: Adjust the 8-level equalization control to the received HDMI signals. The HDMI signal level varies from 0 (strongest) to 7 (weakest) for respective transmission length from longest possible range to short distance. Please adjust the signal level from 7 to 0 and stop turning the rotary switch whenever the audio/video is playing normally. Inappropriate signal level setting may cause overpowering issue that would shorten the product life significantly! DON NOT let the rotary arrow pass through 6 which will erase the EDID just learned and restore to default EDID. 1.8 Installation To setup Avenview HDM-C5-3X-SET follow these steps for connecting to a device: 1. Connect your HDMI/DVI source (such as a Blu-ray Disc player) to Transmitter (HDM-C5-3X-S). 2. Connect your HDMI/DVI display (such as a LCD TV) to the receiving unit HDM-C5-3X-R. 3. Connect your CAT-5/5e/6 LAN cable between the transmitting and receiving units. 4. Make sure CAT-5/5e/6 LAN cable is tightly connected and not loose. 5. Plug in 5V DC power cord to the power jack of the receiving unit HDM-C5-3X-R. 6. Plug in 5V DC power cord to the power jack of the transmitting unit HDM-C5-3X-S. 1.9 EDID Learning To learn EDID from the monitor/TV following these steps 1. Turn on HDM-C5-3X-S. 2. Turn the Mode of HDM-C5-3X-S counterclockwise from 0 (for surround sound) or 1 (for stereo) to 7. 3. Use a HDMI cable to connect HDM-C5-3X-S & the display (better not connect to video source). The LED on the RJ-45 of HDM-C5-3X-S will dim and light again, which indicates the EDID learning process is finished. 4. Turn the Mode of HDM-C5-3X-S clockwise from 7 to 0 (for surround sound) or 1 (for stereo). 5. Connect HDM-C5-3X-S and the video source through a HDMI cable and enjoy the experience. 1.10 General Troubleshooting Problem Possible Solution No Image . Check if connection to the source and the display are correct. . Ensure that display device supports 480p, 720p and 1080p resolution Screen Defects Appear . This product supports up to 1080p (1920x1...