Votos - 2, Puntuación media: 5 ( )

Fabricar: LG Tamaño del archivo: 2.79 mb Nombre del archivo: Idioma del manual:

* 1m = 3.28 feet, 1 feet = 0.305m, 1m = 100cm, 1 feet = 12 inches Connecting to Various Equipment HDTV description The projector is capable of displaying various High Definition TV display modes. Some of these sources are: • Digital-VHS (D-VHS) player • DVD player • Satellite Dish HDTV receiver • DTV tuners Most of these sources will provide an analog composite video output, a standard VGA output, or a YPbPr (default) format. The projector is capable of accepting HDTV data through a YPbPr connector. Use a HDTV cable that came with your projector to display HDTV images. The following standards are supported in the HDTV function: • 480i • 480p • 576i • 576p • 720p • 1080i Please refer to "Menu System" on page 17 for information on the HDTV (YPbPr) OSD selections. Connecting to Various Equipment It only takes a few seconds to connect your projector to your desktop or notebook computer, VCR, or other systems. However, a Mac adapter (an optional accessory) is needed for connection to Macintosh computers. DLP Personal Projector 11 Connecting to Various Equipment It only takes a few seconds to connect your projector to your desktop or notebook computer, VCR, or other systems. However, a Mac adapter (an optional accessory) is needed for connection to Macintosh computers. 1. Notebook/ Computer (Macintosh computer is only supported with D- Sub IN connector.) The USB cable is not needed unless you have a remote control with mouse functions. 2. DVD player or HDTV signal can only support D-SUB IN. VideoD-SUBINACINDVI-DS-VideoRS-232AudioUSBPC / Notebook USB PC Audio USBPC Audio Control To RGB Input DVI-D RGB VideoD-SUBINACINDVI-DS-VideoRS-232AudioUSBDVD Player YPbPr 3. S-video device VideoD-SUBINACINDVI-DS-VideoRS-232AudioUSBS-Video 12 DLP Personal Projector 4. Video device or VCR VideoD-SUBINACINDVI-DS-VideoRS-232AudioUSBVideo / Audio DLP Personal Projector 13 14 DLP Personal Projector OPERATION Start Up 1. Plug the power cord into a wall socket. 2. Turn the Main Power Switch on. 3. Press and hold POWER to start the unit. The Power Indicator flashes green and stays green when the power is turned on. (When the power is turned off, there is a 90-second cooling period before the projector can be re-started.) 4. Switch on all connected equipment. (110V) (220V) AUTO BLANK SOURCE KEYSTONE - KEYSTONE + POWER MENU /EXIT Projector Remote Control Digital Keystone Correction Keystoning refers to the situation where the projected image is noticeably wider at either the top or bottom. To correct this, press KEYSTONE 3/ 4 (hot key) on the remote control, and then adjust the sliding bar labeled Keystone, as needed. Press 3 to correct keystoning at the top of the image. Press 4 to correct keystoning at the bottom of the image. AUTOBLANKSOURCEKEYSTONE-KEYSTONE+ POWERKEYSTONEMENU/EXITProjector Remote control Auto Adjustment In some cases, you may need to optimize the picture quality. To do this, press the AUTO key on the control panel of the projector or on the remote control. The built-in Intelligent Auto Adjustment function will re-adjust settings to provide the best picture quality. *This function is available only in Analog RGB mode. Projector Remote control AUTOBLANKSOURCEKEYSTONE-KEYSTONE+ POWERMENU/EXIT DLP Personal Projector 15 Source Selection When several input sources are available, press the SOURCE key to make a selection from the control panel of the projector or the remote control. Because Analog RGB and YPbPr inputs share the same terminal in the back of the projector, there’s only one signal can be applied at one time. Projector Remote control AUTOBLANKSOURCEKEYSTONE-KEYSTONE+ POWERMENU/EXIT Blank Uses BLANK to hide the screen image and press BLANK again or RETURN to bring the image back. Projector Remote control AUTOBLANKSOURCEKEYSTONE-KEYSTONE+ POWERBLANKMENU/EXIT 16 DLP Personal Projector Menu System To use the MENU button on the remote control: 1. Press MENU to display the main OSD menu. 2. Press 3or 4 to select a sub-menu. 3. Press MENU again to select items in the sub-menu. 4. Press 3or 4 to adjust / select items. 5. Press EXIT to return to the previous menu. To use the MENU / EXIT button on the projector contol panel: 1. Press MENU / EXIT to display the main OSD menu. 2. Press < or > to select a sub-menu. 3. Press v (DOWN) to select items in the sub-menu. 4. Press <, >, ^ or v to adjust / select items. 5. Press MENU/ EXIT to return to the previous menu. : Menu Bar Sub-menu Display Image Source Control PIP Analog RGB Keystone Brightness Auto Resize H Position V Position Color Temp Information Mirror Source Volume Mute Main Page: Language OSD: Setup Economic Mode Reset Lamp Hour OSD Sub Page: OSD Pos. OSD Time Set Up Sub Page: Source Scan Keystone Hold Mirror Hold Blank Time Auto Off User Logo Main Page: PIP Source PIP Size PIP Pos. H Position V Position More Options Sub Page: Brightness Contrast Color Tint Sharpness System DVI Y/Pb/Pr (480p / 576p / 720p / 1080i) Contrast Phase H Size Ratio H Position V Position Col...

Descargar ahora

Introduzca dos números de la imagen: