Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
Please refer to your video game console Owner’s Guide. TV back panel (section detail) Any S-Video Device <§L 0R m Figure 10. Connecting an S-Video Device. NOTE: If your DVD player supports progressive scan playback, be sure to set your player accordingly. Please refer to your DVD player’s Owner’s Guide. Other S-Video Device (Figure 10) 1. Connect an S-Video cable from VIDEO OUT on the device back panel to VIDEO INPUT-1 or INPUT-2 on the TV back panel. 2. Connect a set of audio cables from AUDIO OUT on the device back panel to AUDIO INPUT-1 or INPUT-2 on the TV back panel. • The red cable connects to the R (right) channel • The white cable connects to the L (left) channel If your S-Video Device is mono (non-stereo), connect only the white (left) cable. 18 Connecting a DTV Receiver Note: The TV back panel and connections shown here are for reference only and may vary by model. DTV Connectors and Adaptors (Figure 11) The TV back panel has five RCA-type connectors for the DTV connection. The back panel of your DTV receiver may use RCA-type connectors or BNC-type connectors. If your DTV receiver comes with BNC type connections, you will need to purchase BNC to RCA adaptors to connect the TV to the DTV receiver. These adaptors should be available at most electronic supply stores. DTV Receiver with Component Video Connections (Recommended) (Figure 12) 1. Connect the outside antenna cable, or satellite to ANT or SATELLITE IN on the DTV receiver (see your DTV receiver owner’s guide for instructions and cable compatibility). 2. If your DTV receiver has a built-in terrestrial tuner, connect the incoming terrestrial antenna to ANT on the DTV receiver. If your DTV receiver does not have a built-in terrestrial tuner, this TV will only be able to provide an analog signal through Ant-A on the TV back panel. 3. Connect the RCA-type cables from the DTV receiver outputs to DTV INPUT Y/Pb/Pr on the TV back panel. You may need to set the DTV Input Assignment to Y/Pb/Pr (see page 35). 4. Connect the L (left) and R (right) audio cables from the DTV receiver to DTV AUDIO on the TV back panel. 5. To utilize the benefits of a digital A/V receiver, connect your DTV receiver’s digital audio out to a digital input on your digital A/V receiver. Component (1 and 2) may also be used for 1080i components. I IMPORTANT I See Appendix B, page 65 for component video signal compatibility information. For digital audio connections, see your DTV receiver and A/V receiver Owners Guides. TV Back Panel (section detail) r'rN— © © ® © # WE*! m m PEj i .»Ç I *»<7 DTV Receiver (with component vi Y ■ m. p ■-«-0 ■^-0 ' -f——r I-or-1 to antenna, cable or satellite —=œ0»- Figure 12. Connecting the DTV receiver with component Video Connections. 19 Connecting a DTV Receiver, continued Note: The TV back panel and connections shown here are for reference only and may vary by model. TV Back Panel (se gnR>- DTV Receiver (witH RGB connections) -c -*0 5® s.T"'" r^-^i^TAE B*" :U
TV - WS - 48313 (4.1 mb)
TV - WS - 48313 (4.1 mb)
TV - WS - 55313 (4.1 mb)
TV - WS - 55313 (4.1 mb)