Votos - 4, Puntuación media: 3.5 ( )

Fabricar: Hitachi Tamaño del archivo: 6.36 mb Nombre del archivo: Idioma del manual:

Select the device name in the box and press ENTER. Note that the audio settings of Balance, Listen to, and Language are not associated with any specific device and are unaffected by A/V Memory Reset. To reset all A/V settings at once, including these three, perform an A/V Reset using the front-panel buttons. Settings Each device has its own A/V memory. Select the device in A/V Memory Reset, then select Audio or Video to adjust the device’s individual settings. Press ENTER, and the menu is removed and the individual settings are displayed. Use ADJUST or to select the individual settings to be adjusted. Use ADJUST or to make the adjustment. For descriptions of the individual A/V settings see A/V Setting Descriptions, pages 80 and 81. Video Mute Video Mute lets you display a blue background when no signal is being received on Inputs 1–3, COMPONENT 1–3, and HDMI 1 and 2. Film Mode Auto is the default setting. With Auto selected, the TV automatically detects and applies film-decoding correction for images that originated on 24-frame- per-second film cameras and were then converted to 30-frame-per-second video for broadcast. Try the Off setting if the TV adds too many jagged edges to the images. When the original video was filmed on 30-frame-per- second cameras, the Auto setting automatically applies video decoding, the same as used with the Off setting. Film Mode is not effective for high-definition signals. TV Speakers When an A/V receiver has not been set up in NetCommand, this selection will turn the TV’s internal speakers on or off. You may select Off when sending the sound through a separate stereo system or surround sound A/V receiver. This option is unavailable (grayed out) when NetCommand® is enabled and you have selected the A/V receiver icon from the Device Selection menu. In that case, Netcommand automatically turns the TV speakers off. See the NetCommand information for further instructions. Note: To prevent damage from a sudden increase in volume, make sure the TV volume is set to low before setting speakers to On. Using the AUDIO or VIDEO Button on the Remote Control To adjust individual Audio or Video settings directly with the remote control: 1. Press AUDIO or VIDEO to cycle through the available settings. 2. Press ADJUST or to adjust the setting. After five seconds of inactivity, the setting display will disappear. Audio Settings NOTE: The effects of the audio settings of Bass, Treble, Balance and Surround affect the sound heard through the TV speakers only. Analog and Digital Audio Settings A slider displays on screen for most settings. When the slider is displayed, it has a numeric value, so that 63 is the maximum, 31 is the mid-point, and 0 is the minimum. . Bass Enhances or reduces low-pitched sound. . Treble Enhances or reduces high-pitched sound. . Balance Adjusts the level of sound between the left and right speakers. . Surround Creates simulated stereo and surround effects through the TV speakers. Your choices are: • Off: No surround effects. • Simulated Stereo: Your TV will create a simulated stereo effect when watching a non-stereo program. • Surround Sound: Your TV will create a simulated surround effect when watching a stereo program. . Level Sound Turn On or Off to automatically equalize the volume level when there are significant sound-level differences between program segments, e.g., between regular programming and commercials. To receive the best fidelity with music programs, turn this setting to Off. When connecting to an A/V receiver, set level sound to OFF and turn the TV speakers off to send full dynamics to the A/V receiver. Analog-Only Audio Settings You can set analog-only audio settings while viewing either analog or digital sources, but the settings affect broadcast or recorded analog content. . Listen to Determines how your TV receives a broadcast audio signal and plays the sound you hear. Your choices are: • Stereo: Default setting. The TV plays stereo broadcasts in stereo and mono broadcasts in mono. The word “Stereo” is displayed when you tune to a channel broadcasting in stereo. • SAP (Second Audio Program): Additional monaural sound track that you cannot hear during normal TV viewing. The SAP signal might be related to the program you are watching, (such as a sound track in a foreign language), or it might be unrelated (such as a weather report). If an SAP signal is broadcast, the letters “SAP” are displayed when you tune to the channel. • Mono: Reduces background noise. Use when receiving a weak stereo audio signal. All audio is played mono with this setting. Listen to is not available for devices connected to the TV Inputs, component inputs, or 1394 devices. Digital-Only Audio Settings You can set digital-only audio settings while viewing either analog or digital sources, but the settings affect only broadcast or recorded digital content. . Language Determines what possible language you can hear. Your choices are: English Portuguese French Spanish German Other It...

Descargar ahora

Introduzca dos números de la imagen: