Votos - 3, Puntuación media: 3.7 ( )

Fabricar: Mitsubishi Electronics Tamaño del archivo: 6.36 mb Nombre del archivo: Idioma del manual:

Whenever you change settings for Contrast, Brightness, or Color Temperature, first check which of the two modes (Bright/Natural) is active. . Contrast (Bright/Natural) Provides a slider to adjust the white-to-black level. Low contrast shows a variety of shades in darker images, while high contrast shows darker images more uniformly black and makes colors appear more vibrant. In most home lighting situations, a medium contrast looks best. High contrast is good for brightly lit environments. . Brightness (Bright/Natural) Provides a slider to adjust the overall brightness of the picture. . Color Provides a slider to adjust the color intensity. . Tint Provides a slider to adjust the ratio of red to green. . Sharpness Provides a slider to adjust the detail and clarity. . Color Temp (Bright/Natural) Allows you to adjust how white images are displayed. Your choices are: • Low: White images will have a warm cast to them. This adjustment is an average and can vary due to ambient room lighting, video scene brightness, and the TV’s age. Natural/Color Temp at the low setting displays video at the 6500K industry standard for NTSC pictures. • High: White images will have a cool cast to them. This setting may provide the most realistic picture under bright lighting. . PerfectColor™ Adjusts any or all of six colors (Magenta, Red, Yellow, Green, Cyan and Blue) to create color balance. When you select PerfectColor and press ENTER, you can adjust the colors automatically or manually (individually). Individual sliders for each color are displayed. Highlighted text shows which slider you are adjusting. Each TV input or device has a memory for PerfectColor. While using the PerfectColor option, press CANCEL if you want to reset the colors to the default settings. . Video Noise Use to reduce minor noise (graininess) in the broadcast received on Ant-1 and Ant-2, Inputs 1–3, Component 1–3, and HDMI 1 and 2. Use the Standard setting with good-quality signals. NOTE: A slider displays on screen for most settings. When the slider is displayed, it represents numeric values, with 63 as the maximum, 31 as the mid-point, and 0 as the minimum. . DeepField™ Imager When On is selected, the black levels are dynamically enhanced in portions of the screen to provide strong contrast with detail over mixed screen content. When Off is selected, the entire screen adjusts the contrast the same. When Demo is selected, a split screen picture appears and you can see how the picture will look when DeepField Imager is On (right side) or when it is Off (left side). . SharpEdge™ When ON is selected, special edge sharpness enhancements are applied to the vertical edges of images. PC Video Settings . Auto Position. Press ENTER to automatically center the position of the PC video. . HorizPosition (Horizontal Position). Manually adjust the horizontal position of the PC. This selection overrides the Auto Position selection. . VertPosition (Vertical Position). Manually adjust the vertical position of the PC. This selection overrides the Auto Position selection. . Fine Detail. Manually adjust the picture quality of the PC. This selection overrides the Auto Position selection. 6 Additional Features MediaCommand™ and Memory Card Playback...............84 Operation of PIP and POP..............................86 TV Display Formats...................................87 PC Viewing........................................89 PC Display Formats..................................90 MediaCommand™ and Memory Card Playback Warning: Some memory cards available on the market are not properly certified to follow the card type specifications noted below and cannot be used by the card reader. If you experience problems with the reading of your file, please transfer your files to a properly certified card. Memory Card Slots Inserting a memory card 1. Insert a card into a matching card slot on the front of the TV. Be sure to use the correct card slot. Card 1 accepts SmartMedia™. Card 2 accepts MultiMediaCard™ and SD Media Card. Card 3 accepts CompactFlash® and MicroDrive®. Card 4 accepts MEMORY STICK™ and Memory Stick Pro. Cards up to 1 GB, with a file format of FAT 16 (block size = 1024 or 2048) are supported. Normally the label side should be up, but if the card does not fit, try turning the card over and insert again. When properly inserted, the light next to the slot will light up. 2. Press DEVICE on the remote control to display the Device Selection Menu and then select the correct card slot from the list, using ADJUST . 3. The Media Dialog box (figure 1) will automatically display. Use the AUDIO button to switch from JPEG Picture Slide show setup to MP3 or WMA7 Audio Playlist setup, or use the VIDEO button on the remote to switch from the MP3 or WMA Audio Playlist setup to JPEG Picture Slide show setup. Don’t pull the memory card out while it is playing. ForSlideshow,pressPLAY. ForThumbnails,pressGUIDE. Toredisplaythismenuortosetup,pressDEVICEMENU. ForPlaylist,pressAUDIO. Figure 1....

Descargar ahora

Introduzca dos números de la imagen: