Votos - 0, Puntuación media: 4
(
)
)
|
Resumen del manual
Press ^ or B^* on Remote Control for moving the vertical line and and A orW for moving the horizontal line. Red Adjustment 8. Press [IggJj on the Remote Control to display the red adjustment menu. Note: A properly converged cross pattern will appear white with a minimum of red color fringing. *8.: A. cross pattern 4 * a ■*; * * * * ■4- i" # lib' 811 CONVERGENCE ■■ *■ * §■ ‘%i #■ # # w lima 4 §■ # 4% oi> ■■ NEXT: ACTION «i 3$T" $$ 1 9. Align the Red Cross with the white cross pattern at the center of the screen. Press ^ or B^ on the Remote Control for horizontal movement and A or& for vertical movement. Blue Adjustment 10. Press (G5S) on the Remote Control to display the blue adjustment menu. *■11 ill' %■ f •% $ b 4 p #- 4 p ■m CONVERGENCE NEXT : ACTION 11. Align the Blue Cross with the white cross pattern at the center of the screen. Press ^ or ^ on Remote Control for horizontal movement and A o& for vertical movement. 12. Press US! three times to exit menus. Note: TO PREVENT PICTURE TUBE DAMAGE, DO NOT LEAVE TEST PATTERN ON FOR A LONG PERIOD OF TIME. -24- Programming the Home Theater Remote The remote control can be set to control other manufacturers components, by utilizing the MODE SELECTION BUTTONS for CABLE, DSS, VCR, RCVR (a Receiver or Amplifier), CD, LD, and AUX (for Cassette Deck, Second VCR or a DVD.) Code Known Use the following procedure for setting up the remote control using the numerical buttons when the component’s remote code is known. m Determine the brand of the component. I~2l Identify the code(s) associated with the brand from the infrared code index (see following pages). Record all possible codes. m Code From Index Sheet 2J Confirm that the component is plugged in and operating properly, then turn it OFF. I~4l Press and hold theff^i) button, then the (@j§) button so that both are pressecfat the same time for at least] &secondsl Then let go of the buttons. 5J Press the appropriate Mode button for the component. Enter the 3-digit code, by using the Remote Control Keypad “0” through ”9” buttons. |Now the remote is set for the entered code. IT1 Press the button to test the remote. If the correct code is setup for the component (in step Q2), the component will turn on. NOTE: Some brands have multiple codes. Repeat the procedure using another listed code until the component responds correctly. TNQ2AE007-1 Code Unknown Use the following procedure for setting up the remote control when the component’s remote access code is not known. This procedure uses the ’’sequence method”. IBI Confirm that the component is plugged in and operating properly, then turn it OFF. 'HI Press and hold the fB) button, then the button so that both are pressed at the same time for at Ieasr5_secpnds. Then let go of the buttons. 1 Press the appropriate Mode button for the device. Press the button to step over to the next code. Press the button to test the remote. If the correct code is sent, the component will turn on. Once the correct code is found, press the (t^fl button to store the code. H Repeat from step HI above until the proper component code is found. It may take several attempts before the correct code is found. NOTE: If an incorrect code is entered, or when the operation is not completed within 30 seconds, the settings will not change. Infrared Remote Codes for Specific Components Helpful Hint: Write down the code numbers for your components in the space provided below. This will serve as a handy reference whenever you need to reprogram your remote control. CABLE Cable TV Converter Box DSS Digital Satellite System Other Component Other Component VCR VideoCassette Recorder RCVR Receiver or Amplifier Other Component Other Component CD Compact Disc Player LD Laser Disc Player Other Component Other Component -25- VCR Infrared Codes Index The Universal Infrared Remote Control is capable of operating many brands of VCRs. Refer to the Programming the Remote Control section for procedures. Note: The Universal Remote Control memory is limited; therefore, some models of VCRs may not operate. The Universal Remote Control is not designed to control all features that are available in all models. Note: After entering the proper infrared code, press the Remote VCR (*) Selection Mode button. A second VCR can be activated using the same codes, from AUX (**) Selection Mode button. Then refer to the Remote Control Key Functions section, for Remote VCR and VCR 2 function key listing. Code Index for VCRs VCR Brand Code(s) VCR Brand Code(s) Adventura 000 MTC 000,240 Aiko 278 Multitech 000,072 Aiwa 000 NEC 038,041,067 Akai 041,061 Nikko 037 American High 035 Noblex 240 Asha 240 Olympus 035 Audiovox 037 Optimus 037,048,104 Beaumark 240 Panasonic 035,162, 225,454 Bell & Howell 104 Penney 035,037, 038,042 Broksonic 121,184 240 Calix 037 Pentax 042 Canon 035 Philco 035 Carver 081 Philips 035,081 CCE 072,2...
Otros modelos de este manual:TV - PT51G42 (1.51 mb)
TV - PT61G42C (1.51 mb)
TV - PT51G42C (1.51 mb)