Votos - 4, Puntuación media: 4.3
(
)
)
|
Resumen del manual
The PIP frame will appear at the position it was last displayed. The Main Picture Video Source and PIP Video Source will display on screen momentarily. Audio will be that of Main Picture. 4. Press the PIP button again to cancel PICTURE IN PICTURE feature (if desired). Note: For PIP Video source connection, refer to the PIP External Video and Antenna Connections section. Swap Button Press the SWAP button (when the PIP frame is displayed) to interchange what is being viewed on the Main Picture with that of the PIP frame. SWAP d3 CH 2 PIP VIDEO 1 | VIDEO 1 PIP CH 2 Size Button Press the SIZE button (when the PIP frame is displayed) to choose either the large or small PIP frame. Freeze Button Press the FREEZE button to stop action in the PIP frame. FREEZE Notes: • Pressing the FREEZE button when the PIP frame is not displayed, will stop action in the Main Picture and display it within the PIP frame. • Pressing the FREEZE button when PIP frame is displayed, will stop action in the PIP frame. Press the FREEZE button again to continue action. • Press the PIP button to delete PIP frame. Move Button The PIP frame may be located at any corner of the Main Picture by pressing the PIP MOVE button (when the PIP frame is displayed). MOVE Note: Each time MOVE button is pressed (when the PIP frame is displayed), the PIP frame will move counterclockwise as illustrated. Note: Audio will be that of Main Picture. 15 Main Menu NOTE: When Auto Power On feature is activated, Timer Icon will change to Exit Icon. ÄcüäT]] Display and Exit Menus CH BUTTONS Highlight Desired Feature when Menu is Displayed VOL BUTTONS Selects or Adjusts Features when Menu is Displayed Located On Remote Control Picture Adjustments Picture Norm Use to reset Color, Tint, Brightness, Picture, and Sharpness adjustments back to a factory preset level. 1. Press 2. Press Icon. 3. Press to display the Picture Adjustment Menu. IRICTUREl PICTURE NORM NO COLrORH^HHHilU U.UiUU uDSr BRIGHTNESS PICTURE pqpopoo O OOOfi O Q3 O O O 000 3000000 III Hill III il II11»i.l I (IJ II III I III 11 111 f 4. Press A orW to highlight PICTURE NORM. 5. Press or to select “SET’ to normalize Color, Tint, Brightness, Picture, and Sharpness. 6. Press (EED twice to exit menus. Color, Tint, Brightness, Picture, and Sharpness Adjustments 1. Press 2. Press Icon. 3. Press to display the Picture Adjustment Menu. PICTURE! RICTUREINORMUNO COLOR 31 II1111II11II I- GHTNESSlBi timmini ( IPQOOQOp iiiiira ■.■n miimiininiimiini QDIglODOOODOQo^oopoo 4. Press A or^^ to select the desired Picture Adjustment (Color, Tint, Brightness, Picture, or Sharpness). 5. Press ^3 or to adjust your selection. (The Selected Picture Adjustment will be displayed.) 6. Repeat steps 4 and 5 for the remaining Picture Adjustments. 7. Press G3) twice to exit menus. -16- Audio Adjustments Audio Norm This feature is used to reset BASS, TREBLE, and BALANCE back to a factory preset level. NOTE: Bass and Treble is automatically set when Al Sound is ON. 1. Press G3). 2. Press A or^7 and ^ or to highlight the Audio Icon. 3. Press (ESS) to display the Audio Adjustment Menu. à ss ¿il IM V • & B fiî AUDIO NORM NO B'Âss«M№iî[Mïïni imS£EAKE_R_S SAP MONO SURROUND m 4. Press A or^ to highlight AUDIO NORM. 5. Press ^ or ^ to select SET to normalize Bass, Treble, and Balance. 6. Press (S3) twice to exit menus. Bass, Treble, and Balance 1. Press (E5D . 2. Press A or^ and ^ or to highlight the Audio Icon. 3. Press1 to display the Audio Adjustment Menu. a m KÜH3 BASS 31 11 il 111 il 11 nil l BÄlfÄNCE GEES fîOeEÜE® G TViSREAKERS 4. Press A orW to highlight BASS, TREBLE, or BALANCE. 5. Press ^ or to adjust for desired audio response. 6. Press (ESP twice to exit menus. Helpful Hints: BASS - To increase or decrease the Bass response. TREBLE - To increase or decrease the Treble response. BALANCE - To emphasize the LEFT/RIGHT speaker volume. Mode When Audio is broadcast in Stereo or SAP, an On-Screen display will appear on initial ‘Turn On” and “Channel Change”. The available choices will be highlighted. 1. Press 2. Press Icon. 3. Press ¿3 & ŒS SOUND ^¿SPEAKERS SAP MONO SURROUND JsSL 4. Press Ä to highlight MODE. 5. Press ^ or ^ to select STEREO, SAP (Second Audio Programming), or MONO. The selected mode will be highlighted. 6. Press (E3Î twice to exit menus. Helpful Hints: STEREO - Two channel Audio reception. SAP - Second Audio Programming (typically used for bilingual audio). MONO - Use when stereo signal is weak. -17- Al Sound This feature regulates the volume between programs and commercial audio to maintain a constant sound output level. 1. Press fei). 2. Press or^ and or B^ to highlight the Audio Icon. 3. Press GP to display the Audio Adjustment Menu. m m Al SOUND OFF ¡TV/SPEAKERS 4. Press A or^ to highlight Al SOUND. 5. Press ^3 or ^ to select ON or OFF. 6. Press G3) twice to exit menus. Surr...
Otros modelos de este manual:TV - PT61G42 (1.51 mb)
TV - PT51G42 (1.51 mb)
TV - PT51G42C (1.51 mb)