Votos - 5, Puntuación media: 4.4
(
)
)
|
Resumen del manual
52 SYNC .......................................................................... 53 H-FREQ. (kHz)/V-FREQ. (Hz) .....................................53 Operating peripheral equipment using the remote control ..... 54 Programming The Illuminated Remote Control Using Access Codes ........................................ 54 Programming Without A Code (When the code is not known) ......................... 55 Infrared Codes Index .................................................. 56 Mode Operational Key Chart ...................................... 59 Troubleshooting Chart................................................. 61 VIDEO/COMPONENT/PC/DVD input signals .............. 62 Specifications ............................................................... 63 Safety Precautions WARNING Set up Do not place the Plasma TV on sloped or unstable surfaces. • The Plasma TV may fall off or tip over. Do not place any objects on top of the Plasma TV. • If water spills onto the Plasma TV or foreign objects get inside it, a short-circuit may occur which could result in fire or electric shock. If any foreign objects get inside the Plasma TV, please consult an Authorized Service Center. Do not cover the ventilation holes. • Doing so may cause the Plasma TV to overheat, which can cause fire or damage to the Plasma TV. If using the pedestal, leave a space of 3 15/16” (10 cm) or more at the top, left and right, 2 3/8” (6 cm) or more at the bottom, and 2 3/4” (7 cm) or more at the rear. If using some other setting-up method, leave a space of 3 15/16” (10 cm) or more at the top, bottom, left and right, and 3/4” (1.9 cm) or more at the rear. Avoid installing this product near electronic equipment that easily receives electromagnetic waves. • It may cause interference in image, sound, etc. In particular, keep video equipment away from this product. AC Power Supply Cord The Plasma TV is designed to operate on 120 V AC, 50/60 Hz. Securely insert the power cord plug as far as it will go. • If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wall socket plate is loose, they should not be used. Do not handle the power cord plug with wet hands. • Doing so may cause electric shocks. Do not do anything that might damage the power cable. When disconnecting the power cable, hold the plug, not the cable. • Do not make any modifications, place heavy objects on, place near hot objects, heat, bend, twist or forcefully pull the power cable. Doing so may cause damage to the power cable which can cause fire or electric shock. If damage to the cable is suspected, have it repaired at an Authorized Service Center. If the Plasma TV will not be used for a long period of time, unplug the power cord from the wall outlet. If problems occur during use If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the Plasma TV, unplug the power cord immediately. • Continuous use of the TV under these conditions might cause fire or permanent damage to the unit. Have the TV evaluated at an Authorized Service Center. Services to the TV by any unauthorized personnel are strongly discouraged due to its high voltage dangerous nature. If water or foreign objects get inside the Plasma TV, if the Plasma TV is dropped, or if the cabinet becomes damaged, disconnect the power cord plug immediately. • A short may occur, which could cause fire. Contact an Authorized Service Center for any repairs that need to be made. Safety Precautions CAUTION This Plasma TV is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.) • Pedestal (included)................................................... TY-ST42PA20 • Wall-hanging bracket (vertical) ................................. TY-WK42PV2W Always be sure to ask a qualified technician to carry out set-up. When using the Plasma TV Do not bring your hands, face or objects close to the ventilation holes of the Plasma TV. • Top of the Plasma TV is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries can happen if any body parts are brought too close. Placing any object near the top of the TV could also result in heat damages to the object as well as to the TV if its ventilation holes are blocked. Be sure to disconnect all cables before moving the Plasma TV. • Moving the TV with its cables attached might damage the cables which, in turn, can cause fire or electric shock. Disconnect the power plug from the wall outlet as a safety precaution before carrying out any cleaning. • Electric shocks can result if this is not done. Clean the power cable regularly to prevent it from becoming dusty. • Built-up dust on the power cord plug can increase humidity which m...
Otros modelos de este manual:TV - TH-37PA20 (2.01 mb)
TV - TH-42PA25 (2.01 mb)