Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
[Picture and Picture] [Picture out Picture] [Picture in Picture] Main picture Sub picture Main picture Sub picture Main picture Sub picture A B A B Normal Viewing A B Press to swap main picture and sub picture. B A Press to select the input mode. Under main Picture and sub picture display, select the picture which you would like to change input modes. Notes: • The sub picture sound is heard while a sub picture operation is underway. • The sub picture operation automatically returns to the main picture operation if a sub picture operation has not been performed for about 5 seconds or if any of the remote control buttons is pressed (except button). Press to change input signal. B A B A [Example] Main picture label is bright Sub picture label is bright PC1 VIDEO2 PC1 VIDEO2AA B B Input modes switching is possible Main picture label is changed Sub picture label is changed VIDEO2 VIDEO1 PC1 VIDEO2AC B D Picture is changed Press to move the sub picture. Each time the location of the sub picture will be moved. Notes: • This button is effective only in the picture in picture. • The sub picture may be hidden by the on screen display, depending on its position. Notes: • If “Input lock” in Options menu is set to other than “Off”, MULTI PIP function isn’t available. • Sound output is from the picture which is selected in Audio OUT(PIP) (See page 24). • In 2 screen display, the same input mode cannot be selected for the main picture and sub picture. • The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of the pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals displayed on the main picture and depending on the 2-picture display mode. • Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail. • Computer screen picture is displayed in a simplified format, and it may not be possible to discern details on them satisfactorily. • Following combinations of two analog signals cannot be displayed simultaneously. Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB) Advanced PIP 1 2 6 (When Advanced PIP is On) 7 Press to display the Setup menu. Press to select “OSD Language”. Press and hold until the Options menu is displayed. Press to select Advanced PIP. Press to adjust the menu. Off : Sets normal two screen display mode (see page 20). On : Sets Advanced PIP mode. Options On Weekly Command Timer Onscreen display Off Initial INPUT Initial VOL level 1/3 Off Off 0 0 Maximum VOL level Off INPUT lock Off Button lock Off Remocon User level Off Advanced PIP Press to exit from Options menu. Press repeatedly. Each time pressing this One screen Advanced PIP Main screenSub screen 1 2 3 6 5 4 button main picture and sub picture will be displayed as above. Note: To use , , , buttons for the screen operations, follow the procedures in the previous page. Notes: • Advanced PIP corresponding signal Sub screen Main screen NTSC, PAL, SECAM (tuner, video) 525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i, 1250/50i (Component Video, RGB, DVI, SDI, HDMI) 640x480@60Hz, 852x480@60Hz, 1024x768@60Hz, 1366x768@60Hz (RGB, DVI, HDMI) 1280x768@60Hz (DVI) • If “Input lock” in Options menu is set to other than “Off”, MULTI PIP function isn’t available. • Sound output is from the picture which is selected in Audio OUT (PIP) (See page 24). • In 2 screen display, the same input mode cannot be selected for the main picture and sub picture. • The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of the pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals displayed on the main picture and depending on the 2-picture display mode. • Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail. • Computer screen picture is displayed in a simplified format, and it may not be possible to discern details on them satisfactorily. • Following combinations of two analog signals cannot be displayed simultaneously. Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB) • Refer to each board's operating instruction for DVI, SDI, HDMI's corresponding signals. PICTURE Adjustments 1 Press to display the PICTURE menu. 2 Select to adjust each item. Press to select the menu to adjust. Select the desired level by looking at the picture behind the menu. Note: Menu that cannot be adjusted is grayout. Adjustable menu changesdepending on signal, input and menu setting. 0 0 2.2 1/2 BLACK EXTENSION AGC GAMMA INPUT LEVEL ADVANCED SETTINGS NORMALNORMALIZE OFF 0 0 0 0 0 0 2/2 W/B LOW B W/B HIGH R W/B LOW R W/B LOW G W/B HIGH G W/B HIGH B ADVANCED SETTINGS 2/2 ADVANCED SETTINGS COLOR TEMP COLOR MANAGEMENT NORMAL OFF ON PICTURE 1/2 25 0 0 0 5 PICTURE NORMALNORMALIZE STANDARD BRIGHTNESS SHARPNESS PIC...
Otros modelos de este manual:TV - TH-37PR10U (4.04 mb)