Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
Select the items with the remote control. Unit buttons are invalid. OSD LANGUAGE PRESENT TIME SETUP DISPLAY ORIENTATION 1 Select the language. 2 Set. 1 Select “DAY” or “PRESENT TIME OF DAY”. 2 Setup “DAY” or “PRESENT TIME OF DAY”. 1 For vertical installation, select “PORTRAIT”. 2 Set. Notes: • Once the items are set, the screens won't be displayed when switching on the unit next time. • After the setting, the items can be changed in the following menus. OSD LANGUAGE PRESENT TIME SETUP DISPLAY ORIENTATION 1 Select “SET”. 2 Set. Selecting the input signal Select the input signals to be connected by installing the optional Terminal Boards. Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display. Input signals will change as follows: INPUT1 INPUT2A INPUT2B INPUT3 PC SLOT2 is for dual input so that you can select INPUT2A or INPUT2B for INPUT2. For TH-42PH12U, TH-50PH12U INPUT2A : HDMI signal terminal in SLOT2 INPUT2B : HDMI signal terminal in SLOT2 For TH-42PH12L, TH-50PH12L INPUT2A : VIDEO signal terminal in SLOT2 INPUT2B : S VIDEO signal terminal in SLOT2 Notes: • Selecting is also possible by pressing the INPUT button on the unit. • Input terminal will not be selected if the terminal board is not installed into the SLOT. • Select to match the signals from the source connected to the component/RGB input terminals. • In 2 screen display, the same input mode cannot be selected for the main picture and sub picture. • Image retention (image lag) may occur on the plasma display panel when a still picture is kept on the panel for an extended period. The function that darkens the screen slightly is activated to prevent image retention, but this function is not the perfect solution to image retention. INPUT MENU ENTER/+/VOL-/ INPUT MENU ENTER/+/VOL-/ Basic Controls Main Unit Remote control sensor INPUT MENU ENTER/+/VOL-/ Main Power On / Off Switch Power Indicator The Power Indicator will light. Volume Adjustment Volume Up “+” Down “–” When the menu screen is displayed: “+” : press to move the cursor up “–” : press to move the cursor down (see page 19) Enter / Aspect button (see page 19) MENU Screen ON / OFF Each time the MENU button is pressed, the menu screen will switch. Normal Viewing PICTURE SET UP SOUND POS. /SIZE INPUT button (Input signal selection) • Power-OFF .... Indicator not illuminated (The unit will still consume some power as long as the power cord is still inserted into the wall outlet.) • Standby ........ Red (see page 16) • Power-ON ......Green • DPMS (POWER MANAGEMENT) .......................Orange (With PC input signal.) Basic Controls Remote Control Transmitter Standby (ON / OFF) button The Plasma Display must first be plugged into the wall outlet and turned on at the power switch (see page 14). Press this button to turn the Plasma Display On, from Standby mode. Press it again to turn the Plasma Display Off to Standby mode. ACTION button Press to make selections. ASPECT button Press to adjust the aspect. POS. /SIZE button PICTURE button Sound mute On / Off Press this button to mute the sound. Press again to reactivate sound. Sound is also reactivated when power is turned off or volume level is changed. N button POSITION buttons INPUT button Press to select INPUT1, INPUT2, INPUT3 and PC input SLOTS sequentially. (see page 16) When a dual input terminal board is attached, A or B is displayed depending on the selected input signal. (Ex. INPUT1A, INPUT1B) MULTI Window buttons Digital Zoom AUTO SETUP button Automatically adjusts the position/ size of the screen. SET UP button SOUND button Volume Adjustment Press the Volume Up “+” or Down “–” button to increase or decrease the sound volume level. R button (see page 19) Press the R button to return to previous menu screen. OFF TIMER button The Plasma Display can be preset to switch to standby after a fixed period. The setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off timer cancelled) each time the button is pressed. 30 60 0 90 When three minutes remain, “OFF TIMER 3” will flash. The off timer is cancelled if a power interruption occurs. OFF TIMER 90 1 2 3 4 PC 4:3 10:00 RECALL button Press the “RECALL” button to display the current system status. 1 Input label 2 Aspect mode 3 Off timer The off timer indicator is displayed only when the off timer has been set. 4 Clock display On-Screen Menu Displays Remote Control Unit 1 Display the menu screen. Press several times. MENU Press to select. Each time the MENU button is pressed, the (Example: PICTURE menu) menu screen will switch. Normal Viewing PICTURE SOUND SET UP POS. /SIZE 2 Select the item. 1/2 25 0 0 0 5 PICTURE NORMALNORMALIZE STANDARD BRIGHTNESS SHARPNESS PICTURE MENU COLOR PICTURE TINT Select. Select. Press. ( Example: PICTURE menu) Set. 3 Set. Set. Press. 4 Exit the menu. Press several times. MENU Press. Press to return to the previous menu. Overview Note: Menu that cannot be adjusted is grayout. Adjustable menu chan...
Otros modelos de este manual:TV - TH-42PH12U (1.95 mb)
TV - TH-50PH12U (1.95 mb)
TV - TH-42PH12L (1.95 mb)